Find Product

Select a Category:

DM30AHDW-RFB DOME HD 2.8-12MM 1080P 30M IR AHD WHITE CAMERA

Features

REFURBISHED STOCK

Please note, this item is refubished and has minor scratch on the surface. It is in full working order.

  • For CVBS output, hold the OSD key left for 3 seconds
  • For AHD output, hold the OSD key right for 3 seconds
  • To toggle between PAL & NTSC, hold the OSD key down for 3 seconds
  • AHD high definition camera at 1080P resolution
  • Low illumination 1/2.8″ SONY 2.43M CMOS sensor
  • 2.8-12mm lens
  • 20-30m IR distance
  • 36 x Ø5 leds
  • HD AHD 1080P, 800TVL analog dual-output
  • AHD coaxial transmission distance up to 500m
  • AHD/ analog signal
  • D-WDR, 2D/ 3D NR, defog, CRR
  • Motion detection, Privacy zones, BLC and HLC
  • OSD Menu
  • White colour

 

Specifications

CAMERA

 

Sensor

1/2.8″ SONY 2.43M pixels CMOS

Effective pixels

1920*1080

HD AHD output

1080P

Resolution

800TVL (CVBS input) 

Min. Illumination

0 Lux (IR ON) colour: 0.1Lux/F1.2; B/W: 0.01Lux /F1.2 

Sync System

Internal

Scan System

Progressive scan

Lens

2.8-12mm M12 lens

Electronic Shutter

Auto/Manual (X30~1/50000)/FLK

S/N Rate

≥50db(AGC OFF)

Video output

1.0Vp-p composite video output, 75O

IP rating IP65

output model

PAL/NTSC adjustable

OSD menu

White balance

ATW/AWC-SET/INDOOR/OUTDOOR/MANUAL/AWB

NR

2DNR/3DNR,OFF

Image adjustable

lightness, contrast, sharpness, AGC

DWDR

AUTO/ON/OFF

BLC

BLC/HLC/OFF

AGC

ON/OFF/AUTO (1-15)

TDN

B&W, COLOUR, AUTO, EXT

Privacy mask

OFF/ON (4 zone)

Motion detection

OFF/ON (4 zone)

Mirror

horizontal/vertical/HV mirror

Sens-up

OFF/ON (X30, X25, X20, X15, X10, X8, X6, X4, X2)

Lens shading compensation

OFF/ ON

DPC

Auto/ Manual

Defog

OFF/ Auto (Effective under B/ W model )

OSD menu

Chinese, English etc 12 languages

Dual-output

HD AHD/ analog CVBS optional

General

Transmission   distance

75 – 3/ 300m, 75 – 5/ 500m

IR distance

20-30m (36 x Ø5IR led)

power supply

DC12V ± 10% 

Power(max)

280mA ± 10mA (IR ON)

Operating Temperature

−20°C ~ 55°C/  0%-90%

Dimensions(mm)

100(H) x 120(D)mm

Weight/ PC(g)

800g

 

FAQ

Expecting AHD but only getting Composite?
Our AHD cameras come out of the box configured to output Composite (CVBS) to allow installers with test monitors to quickly align the camera. Once positioned correctly, you can set the camera to AHD output using the setting shortcuts below:

  • For CVBS output, hold the OSD key left for 3 seconds
  • For AHD output, hold the OSD key right for 3 seconds
  • To toggle between PAL & NTSC, hold the OSD key down for 3 seconds

 

Troubleshooting

Follow The Steps Below, If You Are Having Issues Connecting Your Doss AHD Cameras To Our Hybrid DVRs

  • Is the power on and are the cameras connected into the DVR correctly?
    • Make sure the power supply to the cameras is working too.
  • Are the cameras in AHD mode or CVBS (576L) mode?
    • Doss AHD cameras come out of the box configured to output CVBS by default (for maximum compatibility with various test monitors used during installation). Easily switch to AHD output by holding the OSD key to the right on the camera for about 3-4 seconds to switch. Please note: Some cameras will have an inline controller, some will have buttons on the back. See camera page for more info.
    • Some Hybrid DVRs do NOT accept 720p or lower resolutions from analogue cameras (eg. HBD8DVR2P). Make sure your DVR is able to do this.
  • Are you wiring directly with RG59 + power cabling, or using CAT5/6 baluns?
    • If the latter, make sure you are using a HD capable balun such as the VPB45HD.
  • Does your TV/Monitor have the required inputs?
    • The new range of Doss Hybrid DVRs only comes with VGA and HDMI video outputs. Make sure your TV/monitor has at least one. HDMI is the recommended connection between the DVR and TV.