Firmware Upgrade Instructions for the DOSS RPDVR16CHD1

This firmware addresses the following issues:

• A bug introduced with the new IMSEYE iOS monitoring software that causes the DVR to reboot when logged in via an iPad or iPhone
• USB Flash Storage not detected and therefore was unable to upgrade firmware.

Quick Instructions

• Download and extract the ZIP File here:
  RPDVR16CHD1-AUG-UPGRADE-v1.4.13.3.zip
• Run RECUpgrade_Config.exe
• Connect to your RPDVR16CHD1 via your network
• Download updatepacket.bin

Step-by-step: Upgrading the DOSS RPDVR16CHD1

1. Ensure your DVR is powered on and is connected to the same network (sub-net) as the computer you are running the upgrade software on. Note the IP address of your DVR (shown on the front panel).
     
2. Once you have downloaded the ZIP file and extracted all the files to a folder on your computer, run RECUpgrade_Config.exe
   
3. Insert the IP into the box ^[1] and then press "Login" ^[2]. The upgrade port is 8000 – if there is a different port number please correct this in the box next to the IP address.
   
   
4. Enter your username and password. By default, username: admin and password: 123456
   
5. Click "Open files", and locate "updatepacket.bin" (extracted from the downloaded ZIP file)
   Note: "updatepacket.bin" must not be renamed or upgrade will fail.
     
   
6. Click "Update" and the process will begin...
         
7. The rest of the upgrade process will take place automatically. Do not disconnect power from the RPDVR16CHD1 or break the network connection while the upgrade is in process!
   
8. When the update is complete, success message will appear. Click "OK", then close the upgrade software by pressing the [×] button.
   The RPDVR16CHD1 will automatically reboot once the update is complete. Once rebooted, check the DVRs firmware version using the method described on the Doss product page.