Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
product

4.5V 300MA POWER SUPPLY

24VDC 3.75A POWER SUPPLY

2.5MM DC SOCKET SCREW

4 WAY POWER BOARD WHITE

2.5MM DC PLUG SCREW

LAPEL MIC OMNIDIRECTIONAL

3 GANG FIGURE 8 POWER LEAD

3M 10AMP IEC-C19 POWER LEAD

0.3M IEC C13 POWER LEAD

0.6M IEC C13 POWER LEAD

IEC PLUG TO 240V SOCKET – 5CM

10 INCH IP VIDEO INTERCOM

IP CONVERTER

SPARE MONITOR FOR DHF72C

420TVL DOOR PHONE

7 INCH IP VIDEO INTERCOM

700TVL DOOR PHONE

DVD MODULE FOR DOS12 PA SYSTEM

WIRELESS UHF MODULE FOR PM12

DUAL USB 35W QUICK CHARGER

35W GAN Quick Charger with Dual Port USB-C & USB-A

Specifications

Output power:

HANDHELD MICROPHONE FOR UHF101

Refurbished stock: Minor scratch, fully tested.

 

Suits UHF101 and UHF401 (UM401) Receivers

Specifications

.rpg_table { border-collapse: collapse }.rpg_table th, .rpg_table td { padding: 5px; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold;text-align: left }

System
Carrier frequency UHF 654-694 MHz
Stability ± 0.005% (at 25°C)
Ambient temperature -10°C ~ +50°C
Max deviation ± 70KHz with level limiting
Dynamic range 110dB
S/N ratio >110dB
T.H.D. >0.5%
Pre/De-Emphasis 50µs
Squelch Tone control and noise lock dual squelch
Frequency response 30Hz – 20KHz
Operating range 100m (approximately 300′) under typical conditions when works with UHF101
Microphone
Type Dynamic microphone
Antenna Built-in
RF output 15mW
RF output 45dBc
Battery Two 1.5V AA battery or 1.2V AA rechargeable battery
Battery life 8 Hours
Dimensions Ø52 x 240mm handheld
Safety Approvals FCC, CE
Weight 260g

MULTIFUNCTION CABLE DETECTOR

Features

Specification

NF-801 Transmitter specifications
Tone frequency 200Hz
Max. distance of transmission Up to 2 kilometers
Max. working current Less than 10mA
Volume Regulate Function Audio volume level control
Tone mode 2 Tones, adjustable
Compatible connectors RJ11,RJ45
Max. signal voltage 8Vp-p
LED lights display Wiremap, tone, tracing
Voltage protection AC 60V/DC 42V
Battery Type DC9.0V battery x 1pc (not included)
Dimensions (LxWxD) 15 x 3.7 x 2cm
NF-801 Receiver specifications
Frequency 200kHz
The Max. working current Less than 30mA
Earphone jack 1
Battery Type DC9.0V(NEDA 1604/6F22) x1pc (not included)
Dimensions (LxWxD) 12.2 x 4.5 x 2.3cm

5W 100V LINE TRANSFORMER

70V/100V LINE TRANSFORMER 0.5/1/2/5W ROHS

View a simple connection diagram (1380kb PDFPDF filefile)

VISUAL FAULT LOCATOR FOR FIBRE

The NF-904 VFL is a compact but powerful Visual Fault Locator, used to find sharp bends & breaks in jacked or bare fiber. It could also be used to identify the connectorsin patch panels and fibres during splicing operations.

Features

 

Specifications

Model NF-904B-10MW (Black / White)
Wavelenth (nm) 650±10nm
Operation Mode Pulsed (2Hz) and CW
Fiber Type SM/MM
Connector 2.5mm Universal
Output power 1mW 5mW 10mW 20mW
Dynamic Distance 0-2km 0-5km 8~10 km 15~18 km
Working temp -20 ~ +60°C
Storage Temp -40 ~ +85°C
Power Supply 1.5V battery
FC interface 1pc (Bundled)
SC/ST /LC interface optional

In the box

CABLE TESTER TRACKER

The Doss NF-469 twin-end multifunction port flash cable checker checks network and telephone cables for continuity. It also helps with tracking network cables back to the switch by flashing the cable port.

Features

Rating Label

Sometimes, it is hard to find patch leads or port numberswhen there is a bunch of them tied and connected to the patch panel.
One easy solution might be to plug in one end of the patchlead into the NF469 tester, when it is set to port flash mode, you will see the led flashing on the patch panel, either on port or front panel.

POE CHECKER

Overview

The 802.3af/802.at PoE (Power over Ethernet) Tester, connected to an RJ45 outlet, allows you to test a live Ethernet cable and determine if both power and data are present. This unit is an easy-to-use Power over Ethernet adapter for professionals, business and home users to determine the existence of PoE.

Features

VISUAL FAULT LOCATOR FOR FIBRE

The NF-904 VFL is a compact but powerful Visual Fault Locator, used to find sharp bends & breaks in jacked or bare fiber. It could also be used to identify the connectorsin patch panels and fibres during splicing operations.

Features

 

Specifications

Model NF-904B-20MW (Black / White)
Wavelenth (nm) 650±10nm
Operation Mode Pulsed (2Hz) and CW
Fiber Type SM/MM
Connector 2.5mm Universal
Output power 1mW 5mW 10mW 20mW
Dynamic Distance 0-2km 0-5km 8~10 km 15~18 km
Working temp -20 ~ +60°C
Storage Temp -40 ~ +85°C
Power Supply 1.5V battery
FC interface 1pc (Bundled)
SC/ST /LC interface optional

In the box

HDMI CABLE TESTER

Features

The HDMI Cable Tester is designed for professional HDMI installations. This portable device allows installers to quickly test, troubleshoot and verify HDMI cables. It is designed to test wire circuit state of HDMI cables with TypeA & C connectors conforming to all HDMI specifications up to version 2.0. Equipped with 3 test modes: Fast Auto Scan, Slow Auto Scan or Manual (step-by-step).

Features

Specifications

Cable Tested HDMI cables with Type A & C connectors conforming to 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a Category 1 and Category 2 cables
Support test (main unit and remote unit) 19 pin-to-pin wire map and shielding detection
Test interface of Master unit HDMI (type A)
Mini HDMI (type C)
Test interface of Remote unit HDMI (type A)
Mini HDMI (type C)
Test Cable length ≤ 50 metres
Test Mode Automatically fast scan
Automatically Slow scan
Manual
Displays 19 LEDs and shield LED on both main and remote unit
Result indication Beeper sound
Low battery indication Under 6V
Power source 9V battery (no included)

FAQ

Why my continuity test always showing short?
Please make sure cable is looped back to main unit when doing continuity test. Remote unit is only to be used for sweep testing.

CABLE TESTER WITH 8 REMOTE ID

The equipment has three parts, including main tester, receiver and remote identifier. It has couples of circuit state testing functions including cable length test, cable line finding, line-to-line, crosstalk and breaking point, serving as a practical tool for low voltage system installation and wiring circuits testing.

Features

Specifications

Display 53x25mm
Testing cable types STP/UTP Cat 5E/ 6, telephone cable, coaxial cable, USB cable and common metal wires connected with alligator clip
Testing device interface Main unit: RJ45 Main), RJ45 (Scan), loop interface, RJ11, BNC plug, USB B-type socket
The Max. distance of tracing cable Electrified wire:3000m
Non-electrified wire: 2000m
Calibration precision 2% (±0.5m)
Line sequence and cable failure positioning Open, short, reverse, cross, crosstalk
Tone frequency 225Hz
The Max. distance of cablemapping 2500m
The Max. distance of cable length testing 1000m
Trace cable coonected to switch Anti-jamming
Tone mode 2 Tones, adjustable
Compatible with connectors RJ11, RJ45, BNC, USB-B
LED lights display Wiremap, tone, tracing
Cable map indication LCD (#1- #8)
Shielded indication LCD (#9)
Voltage protection AC 60V/ DC 42V
Low battery display LCD (6.5V)
Battery type DC9.0V(NEDA 1604/6F22 DC9V) x 1pc
Frequency 225kHz
The Max. working current Less than 70mA
Earphone jack 1
LED illumination 2 LEDs
Power supply Main tester: 9V battery (not included)
Receiver: 9V battery (not included)
Dimensions Main unit: 185 x 80 x 32mm
Receiver: 218 x 46 x 29mm
Romote identifier: 107x30x24mm

CABLE TRACER WITH AC FILTER

Features:

Specification:

Transmitter specifications NF-813C
The mas distance of cable mapping 305m
Cable test types 130kHz
Crosstalk test Yes
Tone mode 2 tones adjustable
Max signal voltage 8Vp-p
Max distance of transmission 600m for RJ45 & RJ11 cable
100m for BNC cable
Battery type 3.7V lithium battry, 1400 mah
Size (mm) 135*78*35mm
Receiver specifications NF-813C
Port RJ45-8P
Anti-jamming yes
Battery type 3.7V lithium battry, 1400 mah
Size (mm) 203 x 45x 33mm

 

8CH NVR/1080P IP CAMERA KIT

tr:nth-child(even) { background-color: #E1E1E1; }

Features

Overview

Have you been shopping around for a CCTV system but couldnot make a decision amongst all the available, confusing options?

This Doss Digital IP 8 channel DVR bundle kit includes everything you need for your home CCTV system.

No more frustration about too many products and options. This bundle kit takes your headache away and make your CCTV shopping experience more pleasant.

The kit comes with:

Features

FAQ

Need help troubleshooting? Click Here to access our help centre and view our FAQ solutions.

Please note: The NVR and IP cameras that come with the IP8INK kit have been specificallydesigned to work exclusively with each other. The NVR will not provide POE functionality to third party cameras, nor will the included IP cameras be powered by third party NVRs.For those setups you have to make sure you provide power to the cameras separately.
Please note that the maximum cable run for this kit is 50m.

NVR Specifications

VIDEO

Video input 8 CH 1080P
Video compression H.264
VGA/ HDMI sync output
Video output 1920*1080, 1440*900, 1280*1024, 1366*768, 1024*768, 800*600
Bit rate 16-8000Kbps
Image display 1/4/6/8/9
Snapshot Support (BMP)
Motion detection 396 (22*18) surveyed area can be set in every screen and multi sensitivity adjustable

AUDIO

Audio encoding G.711A
Audio input IPC complex audio input

VIDEO RECORDING AND PLAYBACK

Video frame rate 1-30fps
Record mode Manual/ alarm/ MD/ regular
Playback synchronic 1 CH 1080P sync playback
Search method Time, calendar, event, channel
Video playback Start, stop, fast play, slow play, frame play, snapshot, full screen, roller amplification time ball precise playback

VIDEO BACKUP

Interface 1 SATA
HDD capacity Max. single 6T
Backup location Local HDD, network storage
Backup method Network, USB storage device, USB recorder
NETWORK MANAGEMENT
Protocol TCP/IP, HTTP, DDNS, SMTP(SSL), DHCP, PPPOE, UPNP,NTP, P2P, ONVIF
Port protocol Onvif, RTSP, GB28181 (optional)
Mobile surveillance

FSEYE for

Browser version
  • Internet Explorer with or without ActiveX controls
  • Chrome, Firefox, Safari and more
Intelligent detection Motion detection, video loss, video mask, tampering alarm, etc.

EXT INTERFACE

Network interface RJ45 10M/ 100M adaptive Ethernet port
RJ45 port 8 CH
Alarm input 2 CH
Alarm output 1 CH
RS-485 1 RS485 port, support FS-KT301 keyboard control
USB port 2, USB 2.0, support

GENERAL

Power supply DC15V/ 5A
Power consumption <10W (Without HDD)
Operation temperature -10°C ~ 55°C/ 10%-90%
Unit dimension (mm) 300*209*48.5
Weight 2 Kg

Camera Specs

CAMERA

Image sensor 1/2.9" SONY 2.07 MP Progressive scan CMOS
Min.illumination 0 Lux/F1.4 (IR ON)
IR distance 15-20M (30xΦ5 IR leds)
Electronic shutter Auto/ Manual(1/25~1/10000), FLK
Day/ Night ICR switch, Auto, clor, B/W, EXT
Scan system Progressive scan
Lens 3.6mm M12 lens
Lens interface M12
R/N ratio ≥50db (AGC OFF)
Output PAL/NTSC adjustable
WDR DWDR
Video Parameter Mirror, 3D noise reduction, sharpness/ Brightness adjustable

AUDIO/VIDEO COMPRESSION

 
Video compression H.264/MJPEG
Encoding features Dual-stream, NTSC main stream: 1080P@30fps, sub-stream: D1@30fps
PAL main stream: 1080P@25fps, sub-stream: D1@25fps
Max. image resolution 1920X1080
Video bit rate Constant bit rate, variable bit rate (16kbps~8000kbps)
Stream type Complex stream/ video stream

NETWORK

 
Motion detection Can be set to a single detection zone, Multi-level sensitivity can be set
Privacy zones 4 zones
Snapshot Support JPEG capture, snapshot resolution based on encoding resolution
Password protection Support
Character display Support (Channel, Date)
Alarm function Network anomaly, mask alarm, motion detection etcintelligent alarm
Mobile surveillance Apple, android
Protocol TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPOE,UPNP,SMTP,ONVIF
Port protocol ONVIF, GB28181(optional)

INTERFACE

 
Network Interface RJ45 10M/100M network adaptive
Analog video output 1CH 1.0Vp-p complex video output

GENERAL

 
Operating temperature /humidity -20°C ~ 55°C/0%-90%
Protection grade IP66
Power supply DC12V/ POE (DC12V) optional
Power consumption (max) <6W
Dimensions(mm) 66(W)*66(H)*166.7(L)mm
Weight/PCS(g) 366g

FAQ

I’ve just hooked up my NVR8CH and I can’t access it—I’ve tried the default password “123456” but it won’t let me continue.
The NVR8CH comes with no password out of the box. You can simply press enter when asked for a password. Remember to set one up from the menu later!
The video from my camera is corrupted.

By default, the NVR main stream is set to 720P, whileyour camera stream may be set to 1080P. Setting the NVR’s stream to 1080P solves the problem.

To change the NVR’s main stream format:

  1. Open the NVR’s settings menu
  2. Navigate to Device > Device Info
  3. Change “Video Format” to either of the [1920×1080] options
  4. Reboot the NVR and the problem should be resolved.
My Doss NVR4CH can’t find my ACTi IP Camera.

Firstly, your ACTi IP Camera may not be running the latest firmware. If not, update it first. Finally, both the NVR and ACTi IP camera need to be set to use ONVIF only.

These aren’t the answers you’re looking for?

Read our new, dedicated NVR Frequently Asked Questions page here!

36CH 16POE 2RU H265 IQ 4K NVR

.dvr-features { /*clear:both*/ } .highlight-feature { float: right; clear: right; padding: 10px; margin: 0 20px 20px; border: 1px solid silver; width: 180px; box-sizing: border-box; -moz-box-sizing: border-box; } .highlight-feature img { max-width: 100% !important; width: auto !important; height: auto !important; } .nvrIqImg { height: 54px; width: 169px; text-indent: -10000px; margin: 10px 0; } .nvrIqImg.newIq { background: url(‘/Images/nvr-iq-new-features.png’) 00; } .nvrIqImg.newUi { background: url(/Images/nvr-iq-new-features.png) 169px 0; } .nvr-iq-ss img { width: 154px; } .nvr-iq-ss img:hover { box-shadow: 0 0 5px rgba(0, 0, 0, 0.5); } .nvr-iq-ss { margin: 10px 0; } table.nvriqTbl td { padding: 5px; border-top: 1px solid #ccc; text-align: center; } td.tdTitle { color: #1291bd; text-align: right !important; height: 50px; vertical-align: top; }

Features

36 channel/16 PoE Network Video Recorder

P2P Technology—no more configuring port forwarding! Easy remote access.

ONVIF is an industry standard protocol ensuring compatibility for IP-based security products regardless of brand! Read more here…

 

New and Improved Features

The Doss IP NVRs are now smarter with baked in Intelligence features. On top of all that, they also now support higher resolution cameras!

Here’s what’s new with the IQ NVR range:

IQ Analysis

With more and more people now turning to CCTV surveillance for their security needs, its no surprise that new technologies are being developed and implemented to helpreduce the need for manual monitoring and the costs associated. One such strategy is the use of Intelligent Video Analytics (IVA).

The Magic of Intelligent Detection

IVA focuses on automating the video analysis of large amounts of data footage and security alerts, rather than having people monitor each camera manually. The software utilises a range of rules and algorithms to ignore any changes in lighting conditions or non-critical activity, andfocus on specific triggers to identify suspicious behaviour and objects.

A good example of Analytics would be its ability to alertauthorities of suspicious objects left in public places, like airports, and use facial recognition to help track downfugitives. It could also be used in Highway CCTV situations to capture and report a vehicle travelling in the wrong direction or performing an illegal turn. Even for the domestic home, Analytics could alert and monitor a trespasser crossing a property line.
With every aspect of our lives being digitised, video footage will be increasingly tagged to these events. Imagine a person scanning a train ticket at a turn style. The scanning of the ticket and the footage from the CCTV camera will get put together and be readily accessible in real time or a month later.

Specs

Rear Interface

Specifications

VIDEO
Network Video input 36CH
Network video input bandwidth 360Mbps
Video compression H.265/H.264 /MJPEG
Video output VGA/HDMI synced output
3840×2160@30Hz,1920×1080 @ 60HZ,1280×1024 @ 60HZ
Video bit rate 16-16000Kbps
Video resolution 4K/5MP/3MP/1080p/960p/720p/D1/VGA/4CIF/DCIF/2CIF/CIF/QC IF
Image display 1/4/6/8/9/16/36
Snapshot JPEG snapshots can be set for automatic or manual capture
Motion detection 396 (22*18 grid) surveyed area can be set in every screen with adjustable sensitivity levels (requires IP camera support)
AUDIO
Audio compression

 

G.711U

Audio input 1CH [RCA port] (IPC complex audio input)
Audio output 1CH [RCA port]
Audio intercom input Bidirectional talk [RCA port]
VIDEO RECORDING AND PLAYBACK
Video frame rate 1-30 FPS
Record method Manual/external alarm/MD/timing/intelligent analysisalarm
Playback ability Support 4CH/4K, 5MP/9CH, 3MP/16CH 1080P, 9/16CH RECORD SYNC playback
Playback mode Regular/Instant replay/Event/External file
Video search Time, calendar, event, channel
Video playback Start, stop, normal play, back play, forward 30 seconds, backward 30 seconds, fast, play, slow play, single frame play, display the hidden progress bar, backup, snapshot, full screen, roller amplification time ball precise playback
STORAGE AND BACKUP

Storage Interface

8 SATA, 1E-SATA
HDD capacity 6TB max. per HDD
Backup location Local, network, IPSAN, NAS
Backup method USB mobile hard disk, U disk, network backup
FUNCTION
Network protocol TCP/IP, HTTP, DDNS, SMTP (SSL), DHCP, PPPOE, UPNP, NTP, P2P, ONVIF
Interface protocol ONVIF, RTSP, GB28181
Mobile surveillance iOS and Android via FSEYE app
Web Browser Supports IE (with or without ActiveX), Chrome, Firefox, Safari
Intelligent Analysis Front (IP Camera) and local detection for: Target counting, object detection, object left/lost, line cross detection, scene change, motion detection, video loss, privacy mask, video tampering
Other Dual password authentication, zero channel
Alert Options Email alert, Audible alarm, Visual alert on monitor,Upload to center (get alerts on the VMS PC client), Trigger alarm output
EXT INTERFACE
Network interface 1x RJ45 100M/1000M adaptive Ethernet port
PoE interface 16CH
Alarm input 4CH
Alarm output 1CH
RS-485 1CH
USB ports 2x USB2.0 ports 1 US3.0
GENERAL
Power supply ac100-240v, 50Hz to 60Hz
Power consumption <35W (Without HDD)
Operation temperature/ humidity -10°C ~ 55°C/10% 90%
Dimension (mm) 440 (W) x 432 (D) x 90 (H) mm
Weight 7kg

FAQ

CCTV Calculator Calculate everything!

Visit our NVR IQ Range knowledge base for tips,tricks, how-tos and videos!

Q: I have already installed the plugin on my computer, so why does it still say the IE ActiveX is not registered when I try to access the NVR/IPC via Internet Explorer?
A: You may have to check your security setting on your Internet Explorer, refer to the images attached.

Videos

Watch our NVR IQ Series Videos over at our YouTube channel.

8 CHANNEL NVR WITH 4CH POE

Features

CCTV Calculator Calculate everything!

Features

Doss 8 channel NVR is a budget NVR that is suitable for all your daily needs.

Specifications

VIDEO

Video input 8CH 1080P/ 8CH 960P/ 8CH 720P
Video compression H.264
Video output VGA/HDMI sync output
1920*1080, 1440*900, 1280*1024, 1366*768, 1024*768, 800*600
Video bit rate 64-8000Kbps
Video resolution 1080P/ 960P/ 720P/ D1/ VGA/ 4CIF/ 2CIF/ CIF/ QCIF
Image display 1/4/6/8/9
Snapshot BMP Supported
Motion detection 396(22*18) surveyed area can be set in every screen and multi sensitivity adjustable

AUDIO

Audio compression G.711A
Audio input IPC complex audio input
Audio output Not Supported
Bidirectional talk input Not Supported

VIDEO RECORDING AND PLAYBACK

Video frame rate 1-30fps
Record mode Manual, alarm, MD, regular
Sync playback 1CH 1080P/ 4CH 960P sync playback
Search method Time, calendar, event, channel
Video playback Start, stop, fast play, slow play, frame play, snapshot, full screen, roller amplification time ball precise playback

STORAGE AND BACKUP

Interface 1 SATA
HDD capacity Single, Max.6T
Backup location Local HDD, network storage
Backup method Network,USB storage device,USB recorder

FUNCTION

Network protocol TCP/IP, HTTP, DDNS, SMTP(SSL), DHCP, PPPOE, UPNP,NTP, P2P, ONVIF
Interface protocol Onvif, RTSP, GB28181 optional
Mobile surveillance Support Apple, Android
Internet explorer Support IE, Chrome, Firefox, Safiri
Intelligent detection Motion detection, video loss, privacy mask, tampering alarm

EXTEIROR INTERFACE

Network interface RJ45 10M/100M adaptive Ethernet port
RJ45 interface 4CH
Alarm input 2CH
Alarm output 1CH
RS-485 1 RS485, support FS-KT301 keyboard
USB port 2, USB2.0, support WIFI/3G extensions
ESATA Not Supported

GENERAL

Power supply DC48V/3A
Power consumption <10W (Without HDD)
Operation temperature -10°C ~ 55°C
Dimension(mm) 300(L)* 209(W)* 48.5(H)
Weight/PCS(g) 2 Kg

1. USB 2.0
2. RJ45 network interface
3. HDMI video output
4. VGA video output
5. DC48V
6. Alarm output
7. Alarm input
8. RS485

FAQ

I’ve just hooked up my NVR8CH and I can’t access it—I’ve tried the default password “123456” but it won’t let me continue.
The NVR8CH comes with no password out of the box. You can simply press enter when asked for a password. Remember to set one up from the menu later!
The video from my camera is corrupted.

By default, the NVR main stream is set to 720P, whileyour camera stream may be set to 1080P. Setting the NVR’s stream to 1080P solves the problem.

To change the NVR’s main stream format:

  1. Open the NVR’s settings menu
  2. Navigate to Device > Device Info
  3. Change “Video Format” to either of the [1920×1080] options
  4. Reboot the NVR and the problem should be resolved.
My Doss NVR4CH can’t find my ACTi IP Camera.

Firstly, your ACTi IP Camera may not be running the latest firmware. If not, update it first. Finally, both the NVR and ACTi IP camera need to be set to use ONVIF only.

These aren’t the answers you’re looking for?

Read our new, dedicated NVR Frequently Asked Questions page here!

Download

NVR_User_Manual pdf;2.88MB
exe; 6.6MB Video Monitor Software (v2.0.1.2-2016.03.10)

In the Box

VISUAL FAULT LOCATOR FOR FIBRE

The NF-904 VFL is a compact but powerful Visual Fault Locator, used to find sharp bends & breaks in jacked or bare fiber. It could also be used to identify the connectorsin patch panels and fibres during splicing operations.

Features

 

Specifications

Model NF-904B-05 (Black / White)
Wavelenth (nm) 650±10nm
Operation Mode Pulsed (2Hz) and CW
Fiber Type SM/MM
Connector 2.5mm Universal
Output power 1mW 5mW 10mW 20mW
Dynamic Distance 0-2km 0-5km 8~10 km 15~18 km
Working temp -20 ~ +60°C
Storage Temp -40 ~ +85°C
Power Supply 1.5V battery
FC interface 1pc (Bundled)
SC/ST /LC interface optional

In the box

16CH HYBRID 5 IN 1 NETWORK DVR

Features

Features

Read our new, dedicated NVR Frequently Asked Questions page!If you’re having troubles with yourNVR, perhaps you can find a solutionhere!

Specifications

Specifications

Model 16CH HYBRID 5 IN 1 NETWORK DVR
VIDEO
Video Input 16CH*3MP(BNC)/4main Play
8CH*4MP(BNC1,3,5,7,9,11,13,15)/4main Play
16CH*3MP(BNC)+16CH*3MP(IPC)/ 1main Play
8CH*4MP(BNC1,3,5,7,9,11,13,15)+8CH*4MP(IPC)/1main Play
Video compression H.264
Video Output Resolution 4MP/ 3MP/ 1080p/ 960p/ 720p/ D1/ 2CIF/ DCIF/ 2CIF/ CIF/ QCIF
Video Output VGA/ HDMI sync output, 1920*1080, 1440*900, 1280*1024, 1366*768, 1024*768, 800*600
Bit Rate 16 – 8000Kbps
Image Display 1/4/6/8/9/16/20/25/36
Snapshoot Support (JPEG)
Motion Detection 396 (22*18) surveyed area can be set in every screen and multi sensitivity adjustable
AUDIO
Audio Encoding G.711A
Audio Input 4CH RCA
Audio Output 1 CH RCA
Talkback
VIDEO RECORDING AND PLAYBACK
Video Frame Rate 8CH mode: 4MP@15fps;3MP@10fps;1080P@25fps(PAL)/30fps(NTSC)real time;720P@25fps(PAL)/30fps(NTSC)real time;analog/IPC@25fps(PAL)/30fps(NTSC)real time.
16CH mode: 3MP@15fps;1080P@15fps;720P@25fps(PAL)/30fps(NTSC)real time;analog/IPC@25fps(PAL)/30fps(NTSC)real time.
Record Mode Manual/ Timing MD/ Regular/Alarm exception/MD oralarm/MD and alarm
Playback Synchronic Analog 4CH/Mixed 1CH main stream sync playback 4CH/8CH sub stream sync playback
Search Method Time, Calendar, Event, Channel
Video Playback Start, Stop, Fast play, Slow play, Frame play, Snapshoot, Full screen, Roller amplification time ball precise playback
VIDEO BACKUP
Interface 2 SATA
HDD Capacity Single largest 6T
Backup location Local HDD, Network
Backup Method Network, USB storage device, USB recorder
Network Protocol TCP/IP, HTTP, DDNS, SMTP, DHCP, PPPOE, UPNP, NTP, P2P,ONVIF
EXT INTERFACE
Network Interface RJ45 10M/ 100M/ 1000M adaptive Ethernet port
Alarm Input 8 CH
Alarm Output 3 CH
RS-485 1 RS485
USB Port 2 USB2.0
GENERAL
Operation Temp And Humidity -10°C ~ 55°C/10?-90?
Power supply DC12V/5A
Power Consumption 35W(Without HDD)
Unit Dimension(mm) L 360*W 242*H 48
Weight 1.5 Kg

Interface

  1. BNC Video Input
  2. Audio Input
  3. Audio Output
  4. HDMI Video output
  5. VGA Video output
  6. RJ45 port
  7. USB 2.0
  8. DC12V Power Supply
  9. Alarm Input
  10. Alarm Output
  11. RS485
  12. Power Switch

FAQ

How much storage do I need?

CCTV Calculator Calculate everything!

In the box

8CH NVR WITH 4 POE IQ ANALYSIS

.dvr-features { /*clear:both*/ } .highlight-feature { float: right; clear: right; padding: 10px; margin: 0 20px 20px; border: 1px solid silver; width: 180px; box-sizing: border-box; -moz-box-sizing: border-box; } .highlight-feature img { max-width: 100% !important; width: auto !important; height: auto !important; } .nvrIqImg { height: 54px; width: 169px; text-indent: -10000px; margin: 10px 0; } .nvrIqImg.newIq { background: url(‘/Images/nvr-iq-new-features.png’) 00; } .nvrIqImg.newUi { background: url(/Images/nvr-iq-new-features.png) 169px 0; } .nvrIqImg.new5Mp { background: url(/Images/nvr-iq-new-features.png) 351px 0; } .nvr-iq-ss img { width: 154px; } .nvr-iq-ss img:hover { box-shadow: 0 0 5px rgba(0, 0, 0, 0.5); } .nvr-iq-ss { margin: 10px 0; } table.nvriqTbl td { padding: 5px; border-top: 1px solid #ccc; text-align: center; } td.tdTitle { color: #1291bd; text-align: right !important; height: 50px; vertical-align: top; }

Features

Attention

Please note for the DOSS 8ch and 16ch NVR range, the IQ analysis feature relies on the built-in IQ feature of theIP cameras themselves, as the chipset built-in to the NVR isnot powerful enough to analyse all the data being captured.

The only exception to this is the 36ch version, NVR36IQ4K, which also supports the local detection features fortarget counting, object detection, object left/lost, line cross detection, scene change, motion detection, video loss,privacy mask & video tampering. The new Doss range of the 4MP and 8MP IP cameras support these IQ features.

8 channel/4 PoE Network Video Recorder

P2P Technology—no more configuring port forwarding! Easy remote access.

ONVIF is an industry standard protocol ensuring compatibility for IP-based security products regardless of brand! Read more here…

 

New and Improved Features

The Doss IP NVRs are now smarter with baked in Intelligence features. On top of all that, they also now support higher resolution cameras!

Here’s what’s new with the IQ NVR range:

 

IQ Analysis

With more and more people now turning to CCTV surveillance for their security needs, its no surprise that new technologies are being developed and implemented to helpreduce the need for manual monitoring and the costs associated. One such strategy is the use of Intelligent Video Analytics (IVA).

The Magic of Intelligent Detection

IVA focuses on automating the video analysis of large amounts of data footage and security alerts, rather than having people monitor each camera manually. The software utilises a range of rules and algorithms to ignore any changes in lighting conditions or non-critical activity, andfocus on specific triggers to identify suspicious behaviour and objects.

A good example of Analytics would be its ability to alertauthorities of suspicious objects left in public places, like airports, and use facial recognition to help track downfugitives. It could also be used in Highway CCTV situations to capture and report a vehicle travelling in the wrong direction or performing an illegal turn. Even for the domestic home, Analytics could alert and monitor a trespasser crossing a property line.
With every aspect of our lives being digitised, video footage will be increasingly tagged to these events. Imagine a person scanning a train ticket at a turn style. The scanning of the ticket and the footage from the CCTV camera will get put together and be readily accessible in real time or a month later.

Notes

Please note for the DOSS 8ch and 16ch NVR range, the IQ analysis feature relies on the built-in IQ feature of the IPcameras themselves, as the chipset built-in to the NVR is not powerful enough to analyse all the data being captured.

The only exception to this is the 36ch version, NVR36IQ4K, which also supports the local detection features fortarget counting, object detection, object left/lost, line cross detection, scene change, motion detection, video loss,privacy mask & video tampering. The new Doss range of the 4MP and 8MP IP cameras support these IQ features.

Specs

Rear Interface

Specifications

VIDEO
Network Video input 8CH
Network video input bandwidth 60Mbps
Video compression H.264 /MJPEG
Video output VGA/HDMI synced output
1920×1080 @ 60HZ,1280×1024 @ 60HZ
Video bit rate 16-8000Kbps
Video resolution 5MP/3MP/1080p/960p/720p/D1/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Image display 1/4/6/8/9
Snapshot JPEG snapshots can be set for automatic or manual capture
Motion detection 396 (22*18 grid) surveyed area can be set in every screen with adjustable sensitivity levels (requires IP camera support)
AUDIO
Audio compression

 

G.711U

Audio input IPC complex audio input
Audio output
Audio intercom input
VIDEO RECORDING AND PLAYBACK
Video frame rate 1-30 FPS
Record method Manual/external alarm/MD/timing/intelligent analysisalarm
Playback ability Support 1CH 5MP/3MP, 4CH 1080P, 8CH sub stream videoplayback
Playback mode Regular/Instant replay/Event/External file
Video search Time, calendar, event, channel
Video playback Start, stop, normal play, back play, forward 30 seconds, backward 30 seconds, fast, play, slow play, single frame play, display the hidden progress bar, backup, snapshot, full screen, roller amplification time ball precise playback
STORAGE AND BACKUP
Interface 2 SATA
HDD capacity 6TB max. per HDD
Backup location Local, network, IPSAN
Backup method USB mobile hard disk, U disk, network backup
FUNCTION
Network protocol TCP/IP, HTTP, DDNS, SMTP (SSL), DHCP, PPPOE, UPNP, NTP, P2P, ONVIF
Interface protocol ONVIF, RTSP, GB28181
Mobile surveillance iOS and Android via FSEYE app
Web Browser Supports IE (with or without ActiveX), Chrome, Firefox, Safari
Intelligent Analysis Front (IP Camera) detection for: Target counting, object detection, object left/lost, line cross detection,scene change, motion detection, video loss, privacy mask, video tampering
Other Dual password authentication, zero channel
Alert Options Email alert, Audible alarm, Visual alert on monitor,Upload to center (get alerts on the VMS PC client), Trigger alarm output
EXT INTERFACE
Network interface 1x RJ45 100M adaptive Ethernet port
PoE interface 4CH (IEEE 802.3af)
Alarm input 2CH
Alarm output 1CH
RS-485 Supported
USB ports 2x USB2.0 ports
GENERAL
Power supply DC 48V/3A
Power consumption <10W (Without HDD)
Operation temperature/ humidity -10°C ~ 55°C/10% 90%
Dimension (mm) 360 (W) x 242.4 (D) x 48 (H) mm
Weight 2 kg

FAQ

How much storage do I need?

CCTV Calculator Calculate everything!

Q: I have already installed the plugin on my computer, so why does it still say the IE ActiveX is not registered when I try to access the NVR/IPC via Internet Explorer?
A: You may have to check your security setting on your Internet Explorer, refer to the images attached.

In the box?

Videos

Watch our NVR IQ Series Videos over at our YouTube channel.

16CH 8 POE IQ ANALYSIS 4K NVR

.dvr-features { /*clear:both*/ } .highlight-feature { float: right; clear: right; padding: 10px; margin: 0 20px 20px; border: 1px solid silver; width: 180px; box-sizing: border-box; -moz-box-sizing: border-box; } .highlight-feature img { max-width: 100% !important; width: auto !important; height: auto !important; } .nvrIqImg { height: 54px; width: 169px; text-indent: -10000px; margin: 10px 0; } .nvrIqImg.newIq { background: url(‘/Images/nvr-iq-new-features.png’) 00; } .nvrIqImg.newUi { background: url(/Images/nvr-iq-new-features.png) 169px 0; } .nvr-iq-ss img { width: 154px; } .nvr-iq-ss img:hover { box-shadow: 0 0 5px rgba(0, 0, 0, 0.5); } .nvr-iq-ss { margin: 10px 0; } table.nvriqTbl td { padding: 5px; border-top: 1px solid #ccc; text-align: center; } td.tdTitle { color: #1291bd; text-align: right !important; height: 50px; vertical-align: top; }

Features

16 channel/8 PoE Network Video Recorder

P2P Technology—no more configuring port forwarding! Easy remote access.

ONVIF is an industry standard protocol ensuring compatibility for IP-based security products regardless of brand! Read more here…

 

New and Improved Features

Notes: Please note there are two network cards built into the NVR. If you use the NVR POE for your IP camera, when you add the IP camera to the NVR, you need to change the IP camera address to different subnet range. Forexample, NVR is Lan1, the IP address will like 192.168.1.189, and all other IP cameras directly connected to the NVR should be set to the address like 192.168.2.xxx;

When you add any ONVIF protocol camera to the NVR, please make sure you have changed the IP address of the ONVIF camera before you add it to the NVR, Lan 2 subnetif connects to NVR directly, Lan 1 subnet if it has own power or connects to POE switch. It is also required to add user name and password info for each ONVIF camera in NVR channel settings, even you have no password set in the camera itself, as NVR has no permission to change ONVIF IP camera address and couldn’t access the camera without login credentials.  

The Doss IP NVRs are now smarter with baked in Intelligence features. On top of all that, they also now support higher resolution cameras!

Here’s what’s new with the IQ NVR range:

IQ Analysis

With more and more people now turning to CCTV surveillance for their security needs, its no surprise that new technologies are being developed and implemented to helpreduce the need for manual monitoring and the costs associated. One such strategy is the use of Intelligent Video Analytics (IVA).

The Magic of Intelligent Detection

IVA focuses on automating the video analysis of large amounts of data footage and security alerts, rather than having people monitor each camera manually. The software utilises a range of rules and algorithms to ignore any changes in lighting conditions or non-critical activity, andfocus on specific triggers to identify suspicious behaviour and objects.

A good example of Analytics would be its ability to alertauthorities of suspicious objects left in public places, like airports, and use facial recognition to help track downfugitives. It could also be used in Highway CCTV situations to capture and report a vehicle travelling in the wrong direction or performing an illegal turn. Even for the domestic home, Analytics could alert and monitor a trespasser crossing a property line.
With every aspect of our lives being digitised, video footage will be increasingly tagged to these events. Imagine a person scanning a train ticket at a turn style. The scanning of the ticket and the footage from the CCTV camera will get put together and be readily accessible in real time or a month later.

Specs

Rear Interface

Specifications

VIDEO
Network Video input 16CH
Network video input bandwidth 80Mbps
Video compression H.265/H.264 /MJPEG
Video output VGA/HDMI synced output
3840×2160@30Hz,1920×1080 @ 60HZ,1280×1024 @ 60HZ
Video bit rate 16-16000Kbps
Video resolution 4K/5MP/3MP/1080p/960p/720p/D1/VGA/4CIF/DCIF/2CIF/CIF/QC IF
Image display 1/4/6/8/9/16
Snapshot JPEG snapshots can be set for automatic or manual capture
Motion detection 396 (22*18 grid) surveyed area can be set in every screen with adjustable sensitivity levels (requires IP camera support)
AUDIO
Audio compression

 

G.711U

Audio input 1CH [RCA port] (IPC complex audio input)
Audio output 1CH [RCA port]
Audio intercom input Bidirectional talk [RCA port]
VIDEO RECORDING AND PLAYBACK
Video frame rate 1-30 FPS
Record method Manual/external alarm/MD/timing/intelligent analysisalarm
Playback ability Support 1CH 5MP/3MP, 4CH 1080P, 9/16CH sub stream video playback
Playback mode Regular/Instant replay/Event/External file
Video search Time, calendar, event, channel
Video playback Start, stop, normal play, back play, forward 30 seconds, backward 30 seconds, fast, play, slow play, single frame play, display the hidden progress bar, backup, snapshot, full screen, roller amplification time ball precise playback
STORAGE AND BACKUP
Interface 2 SATA
HDD capacity 8TB max. per HDD
Backup location Local, network, IPSAN
Backup method USB mobile hard disk, U disk, network backup
FUNCTION
Network protocol TCP/IP, HTTP, DDNS, SMTP (SSL), DHCP, PPPOE, UPNP, NTP, P2P, ONVIF
Interface protocol ONVIF, RTSP, GB28181
Mobile surveillance iOS and Android via FSEYE app
Web Browser Supports IE (with or without ActiveX), Chrome, Firefox, Safari
Intelligent Analysis Front (IP Camera) and local detection for: Target counting, object detection, object left/lost, line cross detection, scene change, motion detection, video loss, privacy mask, video tampering
Other Dual password authentication, zero channel
Alert Options Email alert, Audible alarm, Visual alert on monitor,Upload to center (get alerts on the VMS PC client), Trigger alarm output
EXT INTERFACE
Network interface 1x RJ45 100M/1000M adaptive Ethernet port
PoE interface 8CH (IEEE 802.3af)
Alarm input 4CH
Alarm output 1CH
RS-485 1CH
USB ports 2x USB2.0 ports
GENERAL
Power supply DC 48V/3A
Power consumption <5W (Without HDD)
Operation temperature/ humidity -10°C ~ 55°C/10% 90%
Dimension (mm) 360 (W) x 242.4 (D) x 48 (H) mm
Weight 2.5 kg

FAQ

CCTV Calculator Calculate everything!

Visit our NVR IQ Range knowledge base for tips,tricks, how-tos and videos!

Q: I have already installed the plugin on my computer, so why does it still say the IE ActiveX is not registered when I try to access the NVR/IPC via Internet Explorer?
A: You may have to check your security setting on your Internet Explorer, refer to the images attached.

In the box?

Videos

Watch our NVR IQ Series Videos over at our YouTube channel.

IP8INK SPARE IP CAMERA 12V POE

Please note: The IP8INKSC is primarily designed to work with the IP8INK CCTV kit. It will not accept POE (Power over Ethernet) from traditional 48V POE sources. You may still use this camera with a third party NVR as long as power is supplied separately.

 

CAMERA

Image sensor 1/2.9" SONY 2.07 MP Progressive scan CMOS
Min.illumination 0 Lux/F1.4 (IR ON)
IR distance 15-20M (30xΦ5 IR leds)
Electronic shutter Auto/ Manual(1/25~1/10000), FLK
Day/ Night ICR switch, Auto, clor, B/W, EXT
Scan system Progressive scan
Lens 3.6mm M12 lens
Lens interface M12
R/N ratio ≥50db (AGC OFF)
Output PAL/NTSC adjustable
WDR DWDR
Video Parameter Mirror, 3D noise reduction, sharpness/ Brightness adjustable

AUDIO/VIDEO COMPRESSION

 
Video compression H.264/MJPEG
Encoding features Dual-stream, NTSC main stream: 1080P@30fps, sub-stream: D1@30fps
PAL main stream: 1080P@25fps, sub-stream: D1@25fps
Max. image resolution 1920X1080
Video bit rate Constant bit rate, variable bit rate (16kbps~8000kbps)
Stream type Complex stream/ video stream

NETWORK

 
Motion detection Can be set to a single detection zone, Multi-level sensitivity can be set
Privacy zones 4 zones
Snapshot Support JPEG capture, snapshot resolution based on encoding resolution
Password protection Support
Character display Support (Channel, Date)
Alarm function Network anomaly, mask alarm, motion detection etcintelligent alarm
Mobile surveillance Apple, android
Protocol TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPOE,UPNP,SMTP,ONVIF
Port protocol ONVIF, GB28181(optional)

INTERFACE

 
Network Interface RJ45 10M/100M network adaptive
Analog video output 1CH 1.0Vp-p complex video output

GENERAL

 
Operating temperature /humidity -20°C ~ 55°C/0%-90%
Protection grade IP66
Power supply DC12V/ POE (DC12V) optional
Power consumption (max) <6W
Dimensions(mm) 66(W)*66(H)*166.7(L)mm
Weight/PCS(g) 366g

BULLET 50M 4MP POE IP CAMERA

tr:nth-child(even) { background-color: #E1E1E1; }

Features

Built-in intelligence

The new Doss cameras are smarter. Real smart. Whether youwant to make sure a particular object has been removed or not or whether you need to know if a fire has started or not, the new Doss IQ range cameras have it all.

Here are some of the intelligent analysis baked into the cameras:

Connections

High Resolution – See more!

Specifications

CAMERA  
Image sensor 1/3" 4MP Progressive Scan CMOS
Min.illumination 0Lux/F1.4(IR on)color: 0.5Lux/F1.4, B/W:0.2Lux/F1.4
IR distance 40-50M(3xIR-III Leds)
Electronic shutter Auto/ Manual(1/25~1/10000), FLK
Day/ Night ICR switch, auto, color, B/W, ext
Lens Motorised 2.8-12mm auto lens
Lens interface F14
S/N ratio =35db (AGC OFF)
Output PAL/NTSC adjustable
WDR DWDR(Off/ Low/ Middle/ High)
Light board control Auto/ Manual/ Off
3D N/R Off/ Low/ Middle/ High/ Higher
Defog Off/ Low/ Middle/ High
Mirror Off/ Horizontal/ Vertical/ 180’Š rotation/ Corridor mode(90’Š rotation,270’Š rotation)
Slow Shutter Off/ On
Exposure control Auto/ Manual
Image setting Brightness, Contrast, Saturation, Sharpness, Hue
AUDIO/VIDEO ENCODING  
Video compression H.265/ H.264/ MJPEG
H.265 Encoding Main Profile
H.264 Encoding BaseLine/ Main Profile/ High Profile
Encoding features NTSC: main stream: 2592*1520 @20fps/2560*1440@25fps, sub-stream: VGA@30fps

Max. Resolution 4M(2592X1520)
Video bit rate Constant bit rate, variable bit rate (16kbps~8000kbps)
Video type Complex stream/ Video stream
Audio compression /
Audio bit rate /
Audio control Support input/ output volume gain control
ROI Support 4 zones,multi-stage level
Watermark function /
NETWORK  
Network protocol TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPoE,UPnP,SMTP
Access protocol ONVIF,GB28181 (optional)
Browser Support IE, Chrome, Firefox, Safari
Video preview meanwhile 4
User permission User add/modify/delete, permission management
Safe mode Authorized user name and password, HTTPS encryption and AES link encryption, RTSP verification
Motion detection Set detection zone, Multi-level sensitivity can be set
Tampering alarm 1 zone
Privacy Mask 4 zones
Intelligent analysis Target Counting, Area Detection, Left/ Lost, LineCrossing
Event linkage Email sending, alarm output linkage, preset linkage
Multicast function Support
ANR /
Mobile surveillance Support Apple, Android
Device exception detection Support network disconnected, IP conflict, illegal access alarm
OSD Title, time and date overlay, multi-line OSD, OSD color optional
DST Support
Snapshot Support snapshot, snapshot resolution is encodingresolution
System update Support remote update
Other /
INTERFACE  
Network Interface RJ45 10M/100M network adaptive
Analog video output 1CH 1.0Vp-p Composite video output
Audio /
Alarm input /
Alarm output /
Reset /
RS485 /
Other /
GENERAL  
Operating temperature -20°C ~ 55°C
Operating humidity 0?-90?
Protection grade IP66
Power supply DC12V /PoE optional
PoE Optional
Power consumption (max) <9W
Dimensions(mm) 92.85(W)*95.5(H)*262.82(L)mm
Weight/PCS(g) /

 

FAQ

BULLET 50M IR IP 8MP 4K CAMERA

Features

The DOSS IP cameras are the next step in CCTV technology allowing you to install a complete system using an conventional, economical ethernet network. Features like Power over Ethernet and BNC analogue video output make it a breeze for installers. ONVIF compliance allows integration with compatible Networked Video Recorders, no matter the brand, for centralised video capture and back-up.

Features

Specifications

CAMERA
Image sensor 1/2.5" 8MP Progressive Scan CMOS
Min.illumination 0Lux/F1.4(IR ON)Color: 0.1Lux/F1.4, B/W: 0.05Lux/F1.4
IR distance 40-50M(3*Array IR leds)
Electronic shutter Auto/ Manual(1/25~1/10000),FLK
Day/ Night ICR switch, auto, color, B/W, ext
Lens 3.0-10 mm motorized lens
Lens interface F14
Output PAL/ NTSC adjustable
WDR WDR (Off/ Low/ Middle/ High)
Light board control Auto/ Manual/ Off
3D N/R Off/ Low/ Middle/ High/ Higher
Defog Off/ Low/ Middle/ High
Mirror Off/ Horizontal/ Vertical/ 180’Š rotation/ Corridor mode(90’Š rotation, 270’Š rotation)
Slow Shutter Off/On
Exposure control Auto/ Manual
Image setting Brightness, Contrast, Saturation, Sharpness, Hue
AUDIO/VIDEO ENCODING  
Video compression H.265/H.264/MJPEG
H.265 Encoding Main Profile
H.264 Encoding BaseLine / Main Profile / High Profile
Encoding features NTSC: main stream: 3840*2160@18fps, sub-stream: D1@30fps
PAL: main stream: 3840*2160@18fps, sub-stream: D1@25fps
Max. Resolution 3840*2160
Video bit rate Constant bit rate, variable bit rate(32Kbps~16Mbps)
Video type Complex stream/ Video stream
Audio compression G.711u
Audio bit rate 64Kbps
Audio control Support input/output volume gain control
ROI Support 4 zones, multi-stage level
NETWORK  
Network protocol TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPoE,UPnP,SMTP,FTP
Access protocol ONVIF,
Browser Support IE, Chrome, Firefox, Safari
Video preview meanwhile 4
User permission User add/modify/delete, permission management
Safe mode Authorized user name and password, HTTPS encryption and AES link encryption, RTSP verification
Motion detection Set detection zone, multi-level sensitivity can be set
Tampering alarm 1 zone
Privacy Mask 4 zones
Intelligent analysis Target Counting, Area Detection,Object Left/Lost,Line Crossing
Event linkage Snapshot, TF card video, FTP upload or email sending, alarm output linkage, preset linkage
Multicast function Support
ANR Support,match with NVR
Mobile surveillance Support Apple, Android
Device exception Support network disconnected, IP conflict, illegal access alarm
OSD Title, time and date overlay, multi-line OSD, OSDcolor optional
DST Support
Snapshot Support snapshot, snapshot resolution is encodingresolution
System Upgrade Support remote upgrade
INTERFACE  
Network Interface RJ45 10M/100M network adaptive
Analog video output 1CH 1.0Vp-p composite video Output
Audio Line Input/Output
Alarm input 2CH
Alarm output 1CH
Reset Support
TF card Support Max 256G, Micro SD(SDHC /SDXC) card local-storage
GENERAL
Operating temperature -20°C ~ 55°C
Operating humidity 0?-90?
Protection grade IP66/IK10
Power supply DC12V /AC24V/PoE
PoE Support
Power consumption (max) <9W
Dimensions(mm) 272*127mm

FAQ