BLUE MICROPHONE END

Simply clip on the coloured end to your UH101 to avoid confusion and aid in identifying microphones.

SINGLE CH UHF WIRELESS MIC SYSTEM KIT

SINGLE CHANNEL UHF WIRELESS HAND HELD SYSTEM KIT

Reliable UHF technology
Reaches up to 100m range, depends on Radio Frequency signalabsorption, reflection, and interference.

Wireless microphone
The lightweight microphone with heart-shaped directional characteristic delivers superb audio quality while reducing unwanted background noise. Its small LCD shows the most important information, the selected group, the set channel,the battery indicator as well as the stored transmission frequency.

User Notice
The frequency range of 654 to 694MHz

Infrared Sync
It could not be simpler, with just a touch of a button, the transmitter and receiver can be synchronized easily.

Auto scan available channel
Manual frequency setting available to operate up to 8 sets of UHF103E simultaneously for a flexible larger installation.

Technical Specs

• Carrier Frequency Range:UHF 654-694MHz
• Operating Temperature range: -18 &#186C (0&#186 F)to +57&#186C (+135&#186F)
• T.H.D: 0.5% typical, ref. +/- 30 kHz deviation, 400Hz tone
• Dynamic range: >105 dB A-weighted
• Operating Range: 100m(approximately 300 feet under typical conditions)
• Audio Frequency Response: +/- 2dB, Minimum 50Hz, Maximum 20kHz
• Audio output level (ref. +/- 30kHz deviation with 400Hz tone XLR connector (into 600 Ohm load): -30dBV, 1/4 inch connector (into 3000 Ohm load): -9dBV
• Output Impedance: XLR connector: 200 Ohm, 1/4 inch connector: 1k Ohm
• XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Positive Pin 3: Negative
• Sensitivity: -105dBm for 12dB SINAD, typical
• Image rejection: >70dB, typical
• Power Requirements: 12V DC 500mA supplied by external power supply
• 205(W) x 130(D) x 45(H)mm

Wireless Hand Held Microphone(UH-103E)

• Cartridge: Dynamic (Handheld)
• Antenna: Built-in
• RF transmitter Output: 30mW Max
• Power requirements: 2x AA size alkaline or rechargeable batteries
• Battery Life: +/- 8 hours (Alkaline)
• Dimensions: 230mm length x 50mm diameter
• Weight: 250g (without batteries)
• Housing: Moulded Metal Alloy

Optional bodypack transmitter (UB104E)

• Gain adjustment range: 30dB
• Input impedance: 500K ohm
• RF transmitter output: 30mW maximum
• Dimensions: 90(H) x 68(W) x 26(D)mm
• Weight: 99.8g (without batteries)
• Housing: Moulded ABS case
• Power requirements: 2x AA size alkaline or rechargeable batteries
• Battery life: > 8 hours (alkaline)

Kit contents:

• UHF wireless receiver
• Hand held wireless microphone (UH103E)
• 2x Antennas
• 1.5m length 6.5mm plug to plug mono lead
• 12V 500mA power supply
• 2x AA batteries

HANDHELD MIC FOR UHF103E 203E

Hand held wireless microphone for UHF103E/UHF203E

Specifications:

• Frequency: 654-694Mhz
• Cartridge: Dynamic (Handheld)
• Antenna: Built-in
• RF transmitter Output: 30mW Max
• Power requirements: 2x AA size alkaline or rechargeable batteries included
• Battery Life: +/- 8 hours (Alkaline)
• Dimensions: 230mm length x 50mm diameter
• Weight: 250g (without batteries)
• Housing: Moulded Metal Alloy

DUAL CH UHF PLL WIRELESS MIC SYSTEM KIT

Dual Channel PLL Wireless System

Dual Channel Professional Receiver

• Diversity
• Tone control squelch
• Working range adjustable
• LCD display
  
• 1600 channel selectable
• Group and channel selectable
• Smart option (Infrared SYNC)
  

Match with Stage Professional Handheld Microphone

• Adopting unidirectional condenser element, it createssuperb isolation and unsurpassed gain-before-feedback effect, optimized for vocal and speaking performances.
• Convenient multi-channel selector. You can choose the best frequency from the hundreds available forthe best performance effect.
• Noise absorption design eliminates external and handing noise completely.
• Elegant steel grille provides durable protection to its own shape and element.
• Durable structure modular design is easy for assembly and detachment, especially convenient to after-sales service.
• Low battery consumption, Adopting two 1.5V AA batteries, it works a longer time than expected.
  

Match with Body Pack Transmitter

• Innovated design of the body-pack transmitter can be matched with lavalier, headset or instrument connector, providing another option besides handheld microphone; further more, it sets your hand free!
• Professional TA4F connector prevents the connector from dropping off and creating unwanted noise.
• Low battery consumption. Adopting two 1.5V AA batteries, it works a longer time than expected.
  

SPECIFICATIONS
OVERALL SYSTEM

Carrier Frequency Range: UHF 654-694MHz

Stability: ±0.005%

Normal Deviation: ±35 KHz

Max Deviation: ±80KHz

S/N Ratio: <-110dB

T.H.D: <0.5%

Squelch: Tone control and noise lock dual squelch

Frequency Response: 30Hz – 20KHz

Operating Range: 100m(approximately 300 feet under typical conditions)

Receiver

Receiving Mode: PLL Diversity (Dual Antenna)

Sensitivity: >-107dB

Image Rejection: Over 90dB

Audio Output: Balanced and Unbalanced

Power Requirement: AC 110-120V/220-240V
(50-60) External DC 12V 500mA

Dimensions (W x D x H): 240 x 130 x 42mm

Net Weight: Approx. 1.5kg

Wireless Microphone

Cartridge: Dynamic

Antenna: Built-in

RF Output: <10mW

Spurious Emissions: <45dBc

Normal Deviation: ±35KHz

Maximum Deviation: ±80 KHz

Battery: Two 1.5V AA battery or 1.2V AA rechargeable battery

Battery Life: >8 Hours

SINGLE CHANNEL VHF MIC SYSTEM

System includes

• 1 x VHF-100 Receiver
• 1 x Handheld Microphone
• Loaded with top professional operating features
• NOT FOR USE IN AUSTRALIA! VHF high-band (255 MHz) forinterference-free, long-range performance
• RF LED display for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼" jack output
• Noiseless transmitter On/Off switching
• Locking 3.5mm mini-jack provides secure connection for removable microphone or headset
• Easily accessible Input Level Adjust for optimal sound

20M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– Black 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 20 Metres

20M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– white 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 20 Metres
– AS/NZS3112 compliant
– Approval numbers: Q02716, ES0120690, Q080168 (ES0120526)

0.5M 240V AC MAINS TO FIGURE 8

IEC-C7 Appliance Power Cord – 2m Length
Popular A.C. mains lead used in Calculators, Tape recorders,Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 0.5 Metres.

1M 240V AC MAINS TO FIGURE 8

IEC-C7 Appliance Power Cord – 2m Length
Popular A.C. mains lead used in Calculators, Tape recorders,Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 1 Metre

2M 240V AC MAINS TO FIGURE 8

IEC-C7 Appliance Power Cord – 2m Length
Popular A.C. mains lead used in Calculators, Tape recorders,Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 2 Metres.

3M 240V AC MAINS TO FIGURE 8

IEC-C7 Appliance Power Cord – 3m Length
Popular A.C. mains lead used in Calculators, Tape recorders,Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 3 Metres.

5M 240V AC MAINS TO FIGURE 8

IEC-C7 Appliance Power Cord – 5m Length
Popular A.C. mains lead used in Calculators, Tape recorders,Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 5 Metres.

FLAT MAINS FIGURE-8 LEAD – 1M

IEC-C7 Appliance Power Cord – 1m Length – Right-angle AU 2-pin Mains Plug

FLAT MAINS FIGURE-8 LEAD – 2M

IEC-C7 Appliance Power Cord – 2m Length – Right-angle AU 2-pin Mains Plug
Popular A.C. mains lead used in Calculators, Tape recorders, Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin black cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Right-angle Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 2 Metres.

240V AC MAINS TO FIG 8 – 2M

IEC-C7 Appliance Power Cord – 2m Length
White colour popular AC mains lead used in Calculators, Taperecorders, Radios and Shavers etc…

• Type: Plug with socket
• Application: Residential/General purpose
• Rated voltage: 240V
• Cable type: H03VVH2-F – 2 x 0.75MM²
• 2 x 24/0.20 7.5 Amp twin white cable with 2 pin moulded plug and socket.
• 2 Key Slots
• Fitted with an IEC C7 / Figure 8 connector and Australian 2-pin mains plug with insulated pins compliant with AS/NZS3112.
• Length: 2 Metres

2M POWER EXTENSION LEAD BLACK

EXL2MB EXTENSION LEAD

Specifications:

• 3G1.0mm2 power cord
• Length: 2m
• Color: Black
• 3 pin AU plug to socket
• 10A power lead and plug
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

2M POWER EXTENSION LEAD WHITE

2 Meter Domestic Extension Lead

• 230/240V AC
• 10 Amps
• 2400W MAX
• White 3 core 1.0mm 2 flexible ordinary duty cable
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

5M 7.5A 3 CORE MAINS LEAD

53PW CORE MAINS LEAD

Specifications:

• 3G0.75mm2 power cord
• Length: 5m
• Color: White
• 3 pin AU plug to bare ends
• 10A plug
• tinned plated
• Strip: 10mm
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), Q080451(ES0130530)

5M 7.5A 3 CORE MAINS LEAD

CORE MAINS LEAD

Specifications:

• 3G0.75mm2 power cord
• Length: 5m
• Color: Black
• 3 pin AU plug to bare ends
• 10A plug
• tinned plated
• Strip: 10mm
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), Q080451(ES0130530)

2M 7.5A 3 CORE MAINS LEAD

3 x 24/0.20 7.5Amp PVC cable, with 3 pin plug to bare ends.
– Length: 2 Metres , O/D: 6MM
– Colour: White
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), Q080451(ES0130530) O/D: 6MM

10A 3 CORE MAINS LEAD – 2M

Specifications

• Length: 2m
• Color: Black
• 3 pin AU plug to bare ends
• 10A plug
• 10A lead
• Strip: 10mm
• Outer diameter: 7mm

7M POWER EXTENSION LEAD BLACK

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– Black 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 7 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

3M POWER EXTENSION LEAD WHITE

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 3 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

3M POWER EXTENSION LEAD BLACK

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 3 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

15M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– Black 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 15 Metres

15M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– white 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 15 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

10M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– Black 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 10 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

10M POWER EXTENSION LEAD

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– white 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 10 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

7M POWER EXTENSION LEAD WHITE

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– White 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 7 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

5M POWER EXTENSION LEAD BLACK

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
– Black 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 5 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

5M POWER EXTENSION LEAD WHITE

– PVC ordinary duty cable with fully moulded 3 pin plug and socket
– 10Amp 2400W 230-240V AC
-White 3 Core 1.0mm cable
– Suitable for home and office use.
– Length: 5 Metres
– AS/NZS3112 compliant
– Approval numbers: Q080168 (ES0120526), ES0120690, Q080451(ES0130530)

1M 15AMP IEC-C19 POWER LEAD

IEC-C19 15 Amp Power Cord

As used on rack mounted power boards. Fitted with a female IEC-C19 connector and an Australian 15 Amp 3-pin mains plug with insulated pins compliant with AS/NZS3112.

Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Features a thick earth pin to suit 15A outlets
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3×1.5mm2 power cord
• ROHS Compliant
• Available in 1M(K19-1MB15A),2M(K19-2MB15A), 3M(K19-3MB15A) and 5M(K19-5MB15A) lengths.
• AS/NZS3112 compliant
• Approval numbers: Q050981(ES0120718), Q11027, Q080451(ES0130530)

2M 15AMP IEC-C19 POWER LEAD

IEC-C19 15 Amp Power Cord

As used on rack mounted power boards. Fitted with a female IEC-C19 connector and an Australian 15 Amp 3-pin mains plug with insulated pins compliant with AS/NZS3112.

Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Features a thick earth pin to suit 15A outlets
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3×1.5mm2 power cord
• ROHS Compliant
• Available in 1M(K19-1MB15A),2M(K19-2MB15A), 3M(K19-3MB15A) and 5M(K19-5MB15A) lengths.
• AS/NZS3112 compliant
• Approval numbers: Q050981(ES0120718), Q11027, Q080451(ES0130530)

3M 15AMP IEC-C19 POWER LEAD

IEC-C19 15 Amp Power Cord

As used on rack mounted power boards. Fitted with a female IEC-C19 connector and an Australian 15 Amp 3-pin mains plug with insulated pins compliant with AS/NZS3112.

Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Features a thick earth pin to suit 15A outlets
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3×1.5mm2 power cord
• ROHS Compliant
• Available in 1M(K19-1MB15A),2M(K19-2MB15A), 3M(K19-3MB15A) and 5M(K19-5MB15A) lengths.
• AS/NZS3112 compliant
• Approval numbers: Q050981(ES0120718), Q11027, Q080451(ES0130530)

5M 15AMP IEC-C19 POWER LEAD

IEC-C19 15 Amp Power Cord

As used on rack mounted power boards. Fitted with a female IEC-C19 connector and an Australian 15 Amp 3-pin mains plug with insulated pins compliant with AS/NZS3112. Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Features a thick earth pin to suit 15A outlets
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3×1.5mm2 power cord
• ROHS Compliant
• Available in 1M(K19-1MB15A),2M(K19-2MB15A), 3M(K19-3MB15A) and 5M(K19-5MB15A) lengths.
• AS/NZS3112 compliant
• Approval numbers: Q050981(ES0120718), Q11027, Q080451(ES0130530)

2M 15AMP IEC-C20 EXTENSION

IEC-C19 to IEC-C20 15Amp Extension Cord 15 Amp 1.5mm2 AC power cord fitted with male IEC-C20 and female IEC-C19 15Amp (16Amp) connectors. As used on rack mounted power boards, servers and UPSs. Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Application: Residential/General purpose
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3G1.5mm2 power cord
• ROHS Compliant
• AS/NZS3112 compliant
• Approval numbers: Q11027, Q11026, Q080451(ES0130530)

5M 15AMP IEC-C20 EXTENSION

IEC-C19 to IEC-C20 15Amp Extension Cord 15 Amp 1.5mm2 AC power cord fitted with male IEC-C20 and female IEC-C19 15Amp (16Amp) connectors. As used on rack mounted power boards, servers and UPSs. Specifications:

• Type: IEC socket to IEC plug
• Colour: Black
• Application: Residential/General purpose
• Rated voltage: 250V
• Rated Current: 15A
• Insulation: 3.0 ±0.05mm 45P PVC
• Sheath: 8.2 ±0.1mm Black 55P PVC
• Conductor: 48/0.2BC
• 3G1.5mm2 power cord
• ROHS Compliant
• AS/NZS3112 compliant
• Approval numbers: Q11027, Q11026, Q080451(ES0130530)

3M 7.5A 2 CORE MAINS LEAD

Specifications

• 3G0.75mm2 power cord
• Length: 3m
• Color: Black
• 2 pin AU plug to bare ends

<!–

• 10A plug

–>

• Strip: 10mm
• AS/NZS3112 compliant
• Approval numbers: Q080167 (ES0120526), Q080451(ES0130530)

2M 7.5A 3 CORE MAINS LEAD

Specifications:

• 3G0.75mm2 power cord
• Length: 2m
• Color: Black
• 3 pin AU plug to bare ends
• 10A plug
• 7.5A lead
• Strip: 10mm
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), Q080451(ES0130530)

7.5A 3 CORE RIGHT ANGLE – 2M

23PBR CORE RIGHT ANGLE MAINS LEAD

Specifications:

• 3G0.75mm2 power cord
• Length: 2m
• Color: Black
• 3 pin right angle AU plug to bare ends
• 10A plug
• Strip: 10mm
• AS/NZS3112 compliant
• Approval numbers: Q080168 (ES0120526), Q080451(ES0130530)