BC4L charges NiMH, NiCd and Li-ion batteries. It equipes with backlight LCD display showing charging time, current, voltage, capacity and internal resistance. It also has testing funtions to test capacity and internal resistancce.
Comparsion between BC2S and BC4L
BC2S | BC4L | |
Battery Type | NIMH/ CD AA/AAA BATTERIES |
NIMH/CD AA/AAA/SC/C 3.7V LI-ION |
Charging Current | 200mA/ 500mA/ 700mA/ 1000mA | 300mA/ 500mA/ 700mA/ 1000mA |
Discharge Current | 100mA/ 250mA/ 350mA/ 500mA | 250mA/ 500mA |
USB Output | Yes 5V/ 1A | Yes 5V/ 1A |
Capacity Test | Yes NIMH/CD batteries | Yes NIMH/CD and Li-ion batteries |
Inner Resistance Test | No | Yes |
Modes | 4 Modes: Test, discharge,refresh, charge | 2 modes: test and charge |
Maximum Battery Capacity | 3000mAh | Unlimited |
Discharge Funcion |
Yes, it removes memory effect |
No |
Refresh Function | Yes. Restore batteries capacity to maximum | No |
LCD Display | LCD, showing charging, time, current, voltage, capacity | Back light LCD, showing charging time, current, voltage, capacity and internal resistance |
Please note the fuse has been taken out for transportation safety purpose because of the built in SLA battery. Please put the fuse in before you start to use the PM12.
Power supply: | 230 V AC, 50 Hz |
or 12 V DC via rechargeable battery or external source | |
Rechargeable. battery: | 12 V DC, 7.2 Ah Sealed Lead Acid (included) |
Battery operation: | 4-5 hours |
Recharging time: | 10-11 hours |
Dimensions (L x W x H): | 430 x 370 x 715 mm |
Amplifier: | |
Nominal power output: | 40 W RMS / 4 OHMS |
Maximum power output: | 90 W |
Inputs: | |
Mic, mono: | 2 x 6.3 mm jack, Lo-Z unbalanced, |
Line, stereo: | RCA L/R Hi-Z unbalanced |
Output: | |
Line, mono: | 2 x RCA unbalanced line output |
Sensitivity: | -40dBV (10 mVrms) |
Speaker system: | |
Components: | 30 cm woofer (12 inch) |
Maximum SPL: | 112 dB |
Sensitivity: | 14dBV (200 mVrms) |
Frequency response: | 80 – 15000 Hz |
Bass/treble control | 8dB cut/boost @ 100Hz-8K Hz |
Sensitivity: | -14dBV (200 mVrms) |
Reception modules: | |
Carrier frequency: | UHF |
Frequency: | 654-694 MHz |
Range: | Approx. 40 m |
Wireless microphones: | |
Frequency stability: | ±0.005 % |
RF power output: | 10 mW |
Polar pattern: | Omnidirectional |
Range: | Approx. 40 m |
Battery: | 2 x 1.5 V AA battery (included) |
Battery life: | 10 hours |
Dimensions (D x L): | 40 x 260 mm |
Bluetooth: | |
Carrier frequency: | 2.4 GHz |
Range: | Approx. 10 m |
Audio player: | |
Playback format: | MP3, WMA |
Storage media: | USB devices and SD(HC) cards up to 32 GB |
File system: | FAT32 |
Gross weight | 16.72 kg |
Net weight: | 14.72 kg |
Power consumption: | 35 W |
Size of woofer: | 30 cm (12 inch) |
Heavy duty reed switch for roller doors
.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold; text-align: left }
General | |
---|---|
Rated power output | 27W @ 4Ω continuous |
Max SPL | 102dB @ rated power output |
Battery | one 14.8V rechargeable, 2.5AH Lithium |
Battery Life | 8 hours |
Inputs | |
Frequency response | 60Hz ~ 15,000Hz |
Speaker type | 5.5" full range |
Microphone inputs | Unbalanced 1/4" jack |
Auxiliary input |
Hi-Z (10kOhm) unbalanced 1/8" jack |
Sensitivity for rated output |
|
Microphone | -40dBV (10mVrms) |
Auxiliary | -14dBV (200mVrms) |
Other | |
AC power requirement | 110-240V 50/60Hz 50W Max |
DC Power requirements | 19VDC / 2.3A |
Dimensions | 190 x 180 x 310mm |
Weight | 2kg |
Prominent warning sign for CCTV or dummy surveillance applications. Made by acrylic, which is one of the most UV stable materials. It features long-term durability, outdoor weatherability and UV resistance. It is easy for installation and maintenance. An ideal product for alerting people.
Wireless Remote Control to suit the DOSS WDA-KIT Wireless Security System
The power supply unit is supplied with a short 2.1mm DC plug with bare end lead(Please refer to the product image).If you’d prefer to use a standard power point, you can use apower supply 33774420 SM1205 . If you would like to plug the power into the cigarette socket in the car, please use acigarette lighter plug 07053013 CLP21. Or you can connect it with a battery.
The DOSS Combo20 high gain aerial gives outstanding performance on analogue, digital and FM radio and is the ideal solution for any mobile setup, caravans, motor homes, and boats!
Channels | 0 ~ 69 |
Frequency | VHF 40 ~230MHz, UHF 470 ~ 862 MHz |
Gain | VHF20dB, UHF 19dB |
Front Back Ratio | UHF16° ~ 6°, VHF 0° |
Half Power Angle | UHF 55° ~ 65°, VHF 60°~80° |
Output Impedance | 75Ω, F-Connector (Female) |
Voltage Standing Wave Ratio | 2~3 |
Noise Figure Max. | 4.5db |
Max. Output Level | 100dBµV (IMA -69dB) |
Applicable Temperature | -20°C ~ 50°C |
Wind Surface | 0.181m2 |
Wind Load | 12.67KPA |
Fixed Mast Diameter | 15~56mm |
Power Source | 12VDC / 100mA (Power supply not included) |
Dimension | 400 x 350 x 105 mm |
Weight | 2200 g |
*Please note: Mounting pole not included
Download PDF here.
Input |
1x TVI/AHD |
Output |
1x TVI/AHD, 1x HDMI |
Interface |
HDMI A – Male |
TVI/AHD Input Resolution |
720P (25Hz/30Hz/50Hz/60Hz), |
HDMI Output Resolution |
1080p@60Hz |
Dimensions |
95(L) x 94 (W) x 28(H) mm |
The HDMI2SDI takes Full HD HDMI video with audio and converts it to SDI for transport over up to 2x coaxial cables. This device is great for adding HDMI sources to SDI DVRs or for sending HDMI over Coax where it can then be converted back to HDMI (for example with our SDI2HDMI).
.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px !important; text-align: left !important; vertical-align: top !important; border-top: solid 1px #cccccc !important; border-bottom: solid 1px #cccccc !important; } .rpg_table th, .rpg_table .header { font-weight: bold !important; text-align: left !important; } .rpg_table th[align=center], .rpg_table td[align=center] { text-align:center !important; }
Video Formats |
HDMI |
480i |
|
---|---|---|---|
576i | |||
720p (60 / 59.94 / 50) | |||
1080i (60 / 59.94 / 50) | |||
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98) | |||
SDI | SMPTE-425M | 1080p (60 / 59.94 / 50) | |
SMPTE-274M | 1080p (30 / 29.97 / 25 / 24 / 23.98) | ||
1080i (60 / 59.94 / 50) | |||
SMPTE-296M | 720p (60 / 59.94 / 50) | ||
ITU-R BT.656 | 576i (50) | ||
SMPTE-125M | 480i (59.94) | ||
Input | HDMI | ||
Outputs | 3G-SDI/HD-SDI/SDI | ||
HDMI | Standard Type A connector | ||
HDCP | HDCP Compliant | ||
Power consumption | 2.5Watts (Maximum) | ||
Dimension (L×W×H) | 95×95×29mm | ||
Operating Temperature Range | -5 to +35°C (+23 to +95°F) | ||
Operating Humidity Range | 5 to 90% RH (No Condensation) | ||
Net Weight | 245g |
100V LINE TRANSFORMER 5/10/20/30W ROHS
Primary and secondary taps to suit 4&8 O speakers
©2025 Doss All rights reserved.Design & Developed By Digital Flavers