Select a Category:
15-2400VTS/VRS 2.4GHZ WIRELESS TRANSMITTER
Features:
- Offer a wireless link solution for the audio/video/alarm signals
- Video scramble and manual 7-bit pairing key for security. (4-bit channel select and 3-bit ID
addressing) - Built-in a buzzer for alarm indication.
- 12VDC/750mA by-pass out for a box camera. (TX)
- Built-in a bias-tee circuit (3.3V/25mA) for an active antenna connection. (RX)
- Receiver channel auto-scan mode for multi
TX to Single RX application. - FCC/CE Certified
- Requires power supplies (12V 0.5A for receiver and 12V 1.5A for transmitter)
Applications:
- NTSC/PAL video format available
- CCTV, security and surveillance
- Wireless alarm system
- Single/multi TX to Single/multi RX video broadcasting
Specifications:
Video
| Video I/O | Signal Formats: | NTSC & PAL |
| Input Level: | 1.0 -0.1/+ 0.2 Vp-p | |
| Output Level: | 1.0 -0.1/+ 0.2 Vp-p | |
| Impedance: | 75Ohms | |
| Video Bandwidth: | 5.0MHz minimum | |
| Connector: | BNC |
Audio
| Mono Audio I/O | Input Level: | 2.7 Vp-p maximum |
| Input Impedance: | > 5,000Ohms | |
| Output Level: | 2.7 Vp-p Max (@600Ohms) | |
| Frequency Response: | 150 Hz to 15 KHz (-3dB Bandwidth) | |
| Connector: | RCA |
Alarm
| Alarm I/O | Input (TX): | Level Detection 5 V TTL/CMOS Logic |
| Output (RX): | NC or NO (dry contact) | |
| Output Contact Rating (RX): | AC 125V / 0.5A, DC 24V / 1A | |
| Connectors: | Terminal Block |
TX/RX
| Transmitter | Radiated Power: | FCC Part 15 (15.249) or CE |
| Connector Antenna: | SMA Jack | |
| Receiver | Connector Antenna: | SMA Jack |
| Bias-Tee: | 3.3V/25mA |
RF
| RF system | Frequency of Operation: | 2,400 to 2,483.5GHz |
| Channels (User Selectable): | 4 | |
| Channel Frequencies: | 2,414 MHz /2,432 MHz / 2,450 MHz / 2,468 MHz |
|
| Modulation: | FM | |
| Antenna: | 3dBi Omni Directional | |
| Range: | 200metres Line of Sight (700 feet) |
CH/ID
| Controls & Indicators | Channel Change: | 4-bit DIP SW with auto-scan mode |
| ID Addressing (Pairing): | 3-bit DIP SW | |
| Alarm Mute: | 1-bit DIP SW | |
| DISARM: | Push Button w/ LED Indicator |
|
| TX & RX: | Power On or ARM Status | |
| RX Only: | RF Link Status |
Power
|
Power Please note: Power supplies are not included with this product. |
Input Voltage TX / RX (with OCP): | 12.0 -1.5/+1.0 VDC |
| Input Current TX: |
<100mA (@ 12.0 VDC) Start-up current 500mA (@ 12.0 VDC) |
|
| Input Current RX: |
<250mA (@ 12.0 VDC) | |
| Output Voltage TX (with OCP): | 12VDC / 750mA (Unregulated) |
Mech
| Mechanical & Environmental | Weight (without antenna): | <165g (5.82 oz) |
| Dimensions (excluding connectors and without antenna; W×L×H) |
110 × 86 × 30 mm (4.33” × 3.38” × 1.18”) | |
| Operating Temperature: | -10°C to +50°C | |
| Storage Temperature: | -30°C to +85°C |
Short URL: https://bit.ly/2EOeRMx