Find Product

Select a Category:

DEA7WL2 WIRELESS DOOR/BEAM ENTRY ALARM KIT

Features

DEA7WL is a compact wireless entry alarm system which is easy to install in both indoor and outdoor. It is designed for both residential and commercial using such as garage door, shops, warehouse restaurants and farm etc. to alert you to the entry of customers and visitors. The system consists of a send/receive unit which transmits an IR beam across the doorway onto a prismatic reflector mounted on the opposite side. The beam is reflected back to the receiver to complete the circuit. When a person walks through the beam, the circuit is interrupted and this causes the alarm to sound an audible warning. The warning buzzer can be mounted in any suitable location. The package comes with a solar panel and rechargeable Lithium-Ion battery which enable the sensor to work outdoor that saves you the time and money of wiring.

Please refer to download tab for pairing instructions

Features

  • For monitoring a driveway or use as an entrance indicator
  • No wiring required between the sensor and speaker
  • Upto 100m wireless range
  • When tripped, the sensor wirelessly transmits to any programmed speaker
  • Weatherproof photoelectric beam sensor for outdoor use
  • Speaker makes “ding-dong” or siren sound when beam is interrupted
  • Speaker volume can be adjusted or turned off
  • When in siren mode, sounding time is adjustable from 3~30 seconds
  • Connect additional speakers to the sensor wirelessly (one speaker included)
  • 3.7V Lithium-Ion rechargeable battery pack (lasting for 10 days if triggered less than 2,000 times per day)
  • Each sensor can be paired with unlimited number of speakers
  • Each speaker can be paired with up to 5 sensors

 

Specifications

 Photoelectric Beam Sensor
Type
Infrared Receiver Modules for Remote Control Systems
Housing ABS
Radio Frequency 433.92 MHz
LED Emitting Element Infrared LED Indicator (Red)
Sensing Range 0.5 ~ 7 meters
Power Supply Internal 3.7V Lithium-Ion rechargeable battery pack (1,230mAH)

Supplied with 2.5mm DC socket

B.solar panel
Current Drain (mA) Standby (Beam Aligned properly): 3.7 mA/Beam Broken:14 mA
Duration of Battery If the sensor trigger less than 2,000 times per day, then the battery can be lasting 10 days (also the solar panel is working not proper.)
Power input wire DC Jack (f)5.5mm/2.1mm x (L)12cm
Wireless Door Announcer
Type Microprocessor based control unit
Housing ABS
Radio Frequency 433.92MHz
Wireless Coverage Range ≤100m (Open space)
Volume of Speaker 0 ~ Max (Adjustable)
Chime/Alarm Time 30 sec max. (Adjustable)
Power Supply (Input) AC / DC Adaptor (100-240VAC/50-60Hz)
Power input Jack DC Jack (f)5.5mm/2.1mm
Power Supply (Output) 12VDC/130 mA
Power output Jack Phone Jack (f)3.5mm
Temperature 0°C ~ 50°C
Solar panel
Type 0.8W Solar panel
Housing ABS
Power output wire DC Plug (f)5.5mm/2.1mm x (L)5m , Black
4 Digits Counter (Optional)
Type 4 Digits Counter (Number can be adjusted +/-/Reset)
Housing ABS
Power Supply 12VDC/ 130mA (same power source as speaker)
Power input wire Phone Plug (f)3.5mm

 

FAQ

Q: Can I use DC power supply with the sensor instead of the solar panel?
A: Yes, you can use our DOSS SM520 5V 2A power supply (web link), but you need to change it to 2.5mm DC tip (web link) instead.