REMOTE CONTROL FOR WDA KIT

Wireless Remote Control to suit the DOSS WDA-KIT Wireless Security System

• REMOTE CONTROL
• Power Supply 12V 27A
  (Batteries not included)
• Static Current ≤ 10uA
• Transmit Current ≤ 20mA
• Transmit Frequency 433.92MHz ± 100kHz
• Transmit Distance ≤100 metres (open area)

20DB AMPLIFIED CARAVAN ANTENNA

The DOSS Combo20 high gain aerial gives outstanding performance on analogue, digital and FM radio and is the ideal solution for any mobile setup, caravans, motor homes, and boats!

• The COMBO20 contains a built in amplifier that strengthens weak signals for clearer picture
• Power supply distributor box has a built-in splitter for a second TV outlet
• The DOSS Combo20 aerial is especiallygood in poor reception areas
• Ideal for your caravan, motor home, boat and even as aloft aerial at home
• It comes complete with cables, connectors and fitting instructions
• Easy to assemble and suitable for use throughout Australia
• Please note: The included Power Supply Distributor requires a 12V 100mA power supply.

Images

Specifications

*Please note: Mounting pole not included

In the Box

• Combo20 Antenna
• Power supply distributor box
• 6m sealed ‘F-Type’ to PAL lead
• Mounting hardware

User Manual

Download PDF here.

30W 100V LINE TRANSFORMER

100V LINE TRANSFORMER 5/10/20/30W ROHS

Primary and secondary taps to suit 4&8 O speakers

• Secondary taps: 4&8 OHM
• Power taps: 5W, 10W, 20W, 30W

View a simple connection diagram (1380kb PDFfile)

SDI TO HDMI CONVERTER

CCTV systems are moving towards digital video transmission via SDI or HD-SDI. With this in mind, and the fact most consumer Full HD Displays only have HDMI inputs, the SDI2HDMI performs a vital role in monitoring your digital CCTV system from your home entertainment system.

The SDI loop-out means you can connect your camera to your home video distribution system and your Digital CCTV system simultaneously without lag!

Why would I need to connect my CCTV system to my TV?

Most modern TVs feature a PIP (or Picture in Picture) mode where an alternate video input can be displayed on top of your current picture. This means you can keep an eye on your football game while checking your CCTV system to see who is at the door!

Features

• SDI/ HD-SDI to HDMI
• Equalized Looping SDI/ HD-SDI output
• Supports 1080p@23.9/ 24/ 25 / 29.97/ 30/ 50/ 59.94/ 60Hz
  1080i@50/59.94/60Hz
  720P@50/59.94/60Hz
  576i @50Hz
  480i@59.94/ 60Hz
• HDCP 1.4 Compliant
• Uses 5V power (power adaptor included)

Specifications

.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold; text-align: left } .rpg_table th[align=center], .rpg_table td[align=center] { text-align:center; }

.mvimgbox div { font-size:11px; color:#666; padding: 10px; width: 150px; height: 220px; border: 1px solid #eee; margin:5px; float:left; }

Click on images for larger version

SDI input and output with LED indicators for power andstatus

HDMI output and 5V DC power socket

HDMI TO SDI CONVERTER

Features

The HDMI2SDI takes Full HD HDMI video with audio and converts it to SDI for transport over up to 2x coaxial cables. This device is great for adding HDMI sources to SDI DVRs or for sending HDMI over Coax where it can then be converted back to HDMI (for example with our SDI2HDMI).

• HDMI to SDI Conversion
• Full HDMI support including embedded audio
• Distributes 1x HDMI source to 2x SDI output simultaneously
• Supported formats:
  • 1080p/25
  • 1080p/29.97
  • 1080p/30
  • 1080p/60
• Compliant HDCP
• Uses 5VDC power

Package contents

• Main Unit. HDMI -SDI converter
• DC5V 1A Power Supply
• Operating Instructions

Specifications

.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px !important; text-align: left !important; vertical-align: top !important; border-top: solid 1px #cccccc !important; border-bottom: solid 1px #cccccc !important; } .rpg_table th, .rpg_table .header { font-weight: bold !important; text-align: left !important; } .rpg_table th[align=center], .rpg_table td[align=center] { text-align:center !important; }

5MP TVI/AHD TO HDMI CONVERTER

FEATURES

• Convert TVI/AHD to HDMI, with 1xlooping TVI/AHD output
• Support TVI/AHD 720P, 1080P, 3MP, 4MP input up to 5MP 2560×1920
• Max output support HDMI 1080p@60Hz
• Support transmission distance up to 300m over coaxial cable
• With mounting ears

SPECIFICATIONS

AUTO-LOADING SCREWDRIVER

Auto-loading Precision Screwdriver with gearless ratchet

The patented mechanism on the Doss ALSDP101 makes findingthe right bit a breeze. Simply pull back the handle, rotate the dial to your desired bit and lock the handle back in. Easy!

• Rapid exchange of bits – no need to remove and replacebits manually!
• The clever mechanism makes changing bits a breeze
• Total 10 bits:
  • 6 bits (Phillips + Flat head) loaded in the revolving chamber and ready to go
  • 4 Torx bits stored in handle
• Magnetic bit holder
• 3-way gearless ratchet: Forward/Reverse/Locked
• Rugged, durable polycarbonate handle

	Phillips	#00/#0/#1
	Flat Head	1.5mm/2.0mm/3.0mm
	Torx	T5/T6/T8/T10

7DAY 24HRS MAINS DIGITAL TIMER

Doss MDT02 7 Day Digital Timer

• 10 On/Off programs
• MANUAL ON/AUTO/MANUAL OFF selectable
• 16 combinations of days or blocks of days available
• LCD display
• Maximum of 99 hours 59 minutes 59 seconds count downfunction
• 12/24 hour mode selectable
• Daylight saving time function available via summertime button
• Random function available which will turn your device On or Off randomly between 6:00PM and 6:00AM
• Max load: 10A 2400W

24HRS MAINS MECHANICAL TIMER

MAINS MECHANICAL TIMER 24HRS

• The DOSS MMT24V2 24-hour mechanical timer can automatically switch your mains appliances on and off at any time you set
• Very easy to use, simply rotate the dial to set the time you want, then switch it on
• Minimum duration: 15 minutes (up to 24 hours)
• 240 V 10 AMP 2400 W Max

Easy to use

1. Connect your home appliance
2. Push down the joint slices for the desired duration ( One slice = 15min up to 24 hrs)
3. Turn the disc following the arrow’s direction till it points to the current time. 

NETWORK COAX CABLE TESTER

Doss NF-300 is a multifunction network coax cable tester. Itincludes remote wire map and tone tracer. It also features aporting flashing function for cable identifying on switch.

Features

• Enables cables to be located even when totally concealed
• Memory and storage function
• LCD Screen shows test result clearly
• RJ45, RJ11, USB and BNC cable testing
• Port flashing function
• Cable length testing
• Cable fault testing
• Headphone jack on tone tracer
• LCD screen
• Voltage protection

Specifications

Accessories Included:

VOLTAGE DETECTOR WITH LIGHT

AC Voltage Detector
Non-contact detection of AC Voltage from 100VAC to 600VAC

• Dual function:
  Voltage Finder and Flashlight!
• Extremely easy to use, just hold the detector close toa source to see whether there is any voltage going through it or not. Non-contact means safety.
• Rugged, double molded case
• Bright white LED flashlight with built-in On/Off button
• Flashing red LED light indicator
• Compact and lightweight design with pocket clip
• For use with 50/60Hz circuits
• Includes 2x "AAA" batteries

Specifications:

• Standard CAT III 1000V
• Operating Range: -10°C ~ 50°C
• Size: 176mm x 26mm
• Weight: 48g including batteries

MULTI-BIT RATCHET SCREWDRIVER

The patented mechanism on the Doss ALSDR101 makes findingthe right bit a breeze. Simply pull back the handle, rotate the dial to your desired bit and lock the handle back in. Easy!

• Rapid exchange of bits – no need to remove and replacebits manually!
• The clever mechanism makes changing bits a breeze
• Total 9 bits:
  • 5 bits (Phillips + Flat head) loaded in the revolving chamber and ready to go
  • 4 bits (Torx and Square) to be stored in built-in handle storage compartment
• Includes bit extension addon
• 3-way gearless ratchet: Forward/Reverse/Locked
• Magnetic bit holder
• Rugged, durable polycarbonate handle

	Phillips	#1/#2/#3
	Flat Head	4mm/6mm
	Torx	T15/T20
	Square	S1/ S2

32PCS PRECISION SCREWDRIVER

32 Piece Precision Screwdriver Set

This is the most complete set for driving and retrieving very small screw. Includes a handle, extension shaft and drivers in tiny sizes. Fingertip swivel gives you outstanding control. You can adjust the length of the drivershaft to match the needs of various applications.

• Screwdriver handle with soft touch, grip, swivel cap and extension bit
• 30 commonly used precision bits- 4 (W) x 28 (L) mm bitstandard
• Perfect for mobile phone, computer, watch, eyeglass repair and more
• Handy storage case with labelled bit holders

Bits included:

	Phillips	#000/#00/#0/#1
	Flat Head	1.0mm/1.5mm/2.0mm/2.5mm/3.0mm/3.5mm
	Torx	T1/T2/T3/T4/T5/T6/T7/T8/T9/T10/T15
	Pentalobe	P2/ P5/P6
	TA	2.0mm/2.2mm
	Tri-Point	2.6mm
	Hex	1.5mm/2.0mm/2.5mm

Material

• Bits: SNCM (8660)
• Two-colour handle: ABS + TPR
• Extension bit holder: CRV (6150) + Aluminium

UNDERGROUND WIRE LOCATOR

This underground cable wire locator NF816L is designed to locate and trace low voltage cables buried and hidden wires underground such as for garden lightning systems and landscape automatic watering systems. It can also be used to trace other metal cables either underground or in-wall wires. The detection depth range is 60cm (2 feet) and the maximum cable length is 600M (2000 feet). 

Note: When to find the break point of the wire, it works on single-core or double-core in parallel, NOT multi-core wires, because of the interference between the cores! It works on the multi-core wire when do the tracing. And it is mainly to locate non-energized cables, or low-voltage less than 24V.

Features

• Pinpoint wires for Pet Fence/Electrical Wires, Metal Pipes, Coax Cable, etc. underground or in-wall, or detect and trace the breaking point of the wire
• Wire tracer range up to 60cm (2 feet) deep and 600M (2000 feet) in length, to locate the alarm, sound & computer wires, measure wire depth, and pinpoint drill sites.
• Sound level adjustment to improve efficiency. 
• A pair of earphones supplied can be connected to the receiver 3.5mm jack in a noisy environment. 
• White LED flashlight on the receiver
• Built-in 3.7V 1100mA rechargeable lithium battery on both transmitter and receiver

How to Connect?

• Connect the transmitter to the wire and turn it on. Red alligator clip for the signal, black clip can be connected to ground or neutral or unloaded. 
• Turn on the receiver
• Hang the antenna of the receiver on the ground and swing it back and forth
• When the breakpoint is reached, the tone will weaken and then disappear. The tone will disappear when it is directly above the breakpoint.

Specifications

Transmitter

• Tone Frequency: 200kHz
• Max. Length Distance: 800m / 2400ft
• Max. Depth Distance: 60cm / 24in
• Max. Working Current: Less than 70mA
• Max. Signal Voltage: 15Vp-p
• Signal Display: Tone
• Power Supply: 1 * 3.7V 1100mAh lithium battery built-in
• Transmitter Size: 134 * 49 * 33mm / 5.28 * 1.93 * 1.30in
• Transmitter Weight: 93g / 3.28oz

 Receiver

• Frequency: 200kHz
• Max. Working Current: Less than 70mA
• Earphone Jack: 1
• Power Supply: 1 * 3.7V 1100mAh lithium battery
• Receiver Size: 163 * 40 * 27mm / 6.42 * 1.57 * 1.06in 
• Receiver Weight: 119g / 4.20oz

Package Dimensions: 25 x 15.2 x 4.9 cm; 440 Grams

Package includes:

• 1pc x Transmitter
• 1pc x Receiver
• 1pc x Earphones
• 1pc x Pouch
• 1pc x Manual (English)
• 1pc x USB-A to Micro USB-B lead

12-IN-1 BICYCLE TOOLSET

Make adjustments or repairs on the go!

The DOSS BR12 is the must-have ratchet tool kit for your bicycle repairs on the go. Ideal for strapping to your bicycle, it comes in a handy carrying pouch. Complete with 10 high-quality and specially-selected bits you need to get thejob done. With reverse, lock and forward 3-way function ratchet with 36 teeth and aluminium handle, it makes your job really easy.

Specification

• Aluminium Handle with disc function
• Torque:750-800kg-cm
• 50mm length Stainless Bit Holder: Aluminium + CRV6150
• 1/4" Bits (6.35mm) material: S2
• Pouch: Polyester

What’s included

• 1 pc Aluminium handle ratchet
• 1 pc 50mm length stainless extension bit holder
• 1 pc Handy pouch bag
• 10 high quality commonly used bits: Phillips:#2,Slotted:3/5mm,Torx:T25/T30,Hex:3.0/3.5/4.0/5.0/6.0

Bits included:

	Phillips	#2
	Flat Head	3.0mm/5.0mm
	Torx	T25/T30
	Hex	H3.0/ H3.5/ H4.0/ H5.0/ H6.0

VACUUM SUCTION PEN

The hand-held SMD vacuum pick-up tool uses the vacuum principle. It is specially designed for picking up small electronic components and is ideal for picking up and moving small electronic components, such as IC, SMD, and other parts.

Lightweight, portable, and suitable for picking and placing small components weighing up to 50 grams and having a flat surface or surface mount components, etc. And its new high-power probes have longer holding action.
Spring is added into the needle between the cap and the main body to avoid the needle go-through the cap.

Features

• Compact appearance and lightweight, easy to store in your bag and carry around;
• Soft suction cups avoid scratches or damage to sensitive parts;
• Strong sucking power and high reliability;
• One button to operate and easy to use;
• Comes with an integrated compartment to store the spare parts.

SOLDERING HELPING HANDS STAND

Flexible soldering helping hands with a sponge, rosin, solder wire stand, and cleaning ball set.

Features

• 4 adjustable metal gooseneck arms with a strong base to free your hands and work easier than ever before
• PCB circuit board holder
• Metal base with non-slip rubber strips keeps the soldering helping hands from sliding around on your bench
• Ideal for any application where a third hand is needed for any electronic soldering, crafting, etc.
• Stainless steel precision alligator clamp rotates 360°.
• Comes with a cleaning ball, a solder wire stand, a sponge, and a rosin set

Specifications

• Stainless steel precision alligator clamp
• Dimension: 190*180*285
• Weight: 653g

What is in the box?

• Base x 1pc
• Flexible arms x 4pcs
• Sponge 30*50mm x 1pc
• Rosin 15g x 1pc
• Cleaning ball 10g x 1pc
• Solder wire stand x 1pc

PCB HOLDER

Suitable for everyone’s workbench! The PCB is held in place by spring clamps and can be rotated by adjusting arm. The moveable arm comes with cushion grip which holds your components in place. The base is heavy with well-balanced centre of gravity and built-in rubber feet to ensure you have a firm working surface.

Maximum PCB length approximately 20cm.

Excellent PCB holding choice !

2.4″ LCD BORESCOPE WITH 1080P CAMERA

Features

• Widely application: The bore scope camera with light is widely used for industrial machinery inspection, auto repair, plumbing, housework, wall, chimney or air conditioning maintenance, hvac, sewer check etc. 
• 5.5mm/0.21inch ultra thin probe makes easy to access a wide variety of confined places. With the camera led light, helps the inspection job easier in narrow and dark areas. 
• IP67 waterproof 1080P inspection camera to provide real-time clear HD image and video quality and showed it on 2.4 inch full colour HD screen
• 3 adjustable level LED light helps the inspection easier in the dark environment
• Built-in 2600mAh battery can work continuously about 4~5 hours, easily rechargeable through the supplied USB type C cable
• 5M flexible semi-rigid cable: easy to bend and hold its shape to access a wide variety of narrow places 
• Helpful Attachments: hook and magnet attachments help to retrieve dropped items in hard-to-reach and tight places. The side mirror will be a good to check the place from different angles.  

Specifications

• Monitor: 2.4 inch full colour LCD
• Camera resolution: 1920*1080P
• Horizontal viewing angle: 70°C
• Cable length: 5M
• Focal length: 4cm to 10cm
• Waterproof: IP67 only for the lens
• Lens diameter: 5.5mm front camera
• Body size: 19cm (7.8inch) x 8cm (3.15inch )

Contents

• Inspection camera x 1
• Manual x 1
• USB A to USB C charging cable x 1
• Accessories: 1x hook, ,1x magnet ,1x side mirror. 2x clips 

51 IN 1 TOOL POUCH BAG

51-in-1 Professional Grade Tech and Gadget Repair Kit

The DOSS SDPB511 is the must have tool kit for opening sensitive electronic devices like mobile phones, cameras andeven for repairing watches or eye glasses. Comes in a handy carrying pouch and contains all the precision tools and bitsyou need to get the job done.

• Screwdriver handle with soft touch, grip, swivel cap and extension bit
• 42 commonly used precision bits- 4 (W) x 28 (L) mm bitstandard
• Perfect for mobile phone, computer, watch, eyeglass repair and more
• Handy carry pouch with labelled bit holders

What’s included

• Handy pouch bag
• 80mm Aluminium Magnetic Handle
• Plastic Pry Tool- Phillips Handle
• Plastic Pry Tool- Round Handle
• Triangle Paddle
• Sucker Pick
• 115mm Extension Bit Holder
• Magnetic Parts Mat
• Tweezers

Bits included:

	Phillips	#000/#00/#0/#1
	Flat Head	1.0mm/1.5mm/2.0mm/2.5mm/3.0mm
	Torx	T3/T4/T5
	Torx Security	TH6/ TH7/ TH8/ TH9/ TH10/ TH15
	Pentalobe	P2/ P5/P6
	TA (Triangle)	1.6/ 2.0/ 2.2/ 2.3
	Tri-Point (Tri-Wing)	Y0/ Y1
	Hex	H0.9/ H1.3/ H1.5/ H2.0/ H2.5/ H3.0
	Pin	0.8
	Nut Driver	2.5/ 3.0/ 3.5/ 4.0/ 4.5/ 5.0
	Square	S0/ S1

Material

• Bits: SNCM (8660)
• Pry Tool: PP
• Triangle Paddle: ABS
• Sucker Pick: PVC
• Tweezers: Stainless Steel

RJ45 LAN CABLE TESTER

The NF8108A comes with a main tester and remote identifier. It is especially designed to check and test network cable, such as open, short and reserve. NF8108A can also test cable length accurately which make it becomes an essential tool in communiction field.

Features

• Measure network cable length and determine the distance of open and short circuit.
• Portable unit with long battery life (wait-case 50 hours).
• Automatically time-delay shut off.
• Self-checking and automatically compensate any change inbattery capacity or ambient temperature.

Specifications

LAN TESTER AND MULTIMETER COMBO

2 in 1 LANtester & multimeter is a innovative that allows the user easy to measure DC/AC Voltage/Current, Resistance, Continuity, diode and verify the cable continuity, open/short, cross-connect. The included remote terminator allows the user to test installed cable either at a wall jack or a patch panel adding up mto value and convenience. Proper use and care of this meter will provide years of reliable service.

Features

• 2-in-1 LANtester & multimeter
• Measures:
  • DC/AC voltage
  • DC/AC Current
  • Resistance
  • Continuity
  • Diode Forward Voltage
  • LAN Cable tester
• 3-1/2 digit (2000 count) LCD display for multimeter functions
• LED displays actual pin configuration of:
  • 10BASE-T and 10BASE-02 Thin Ethernet
  • FJ45/RJ11
  • 258A
  • TIA-568a/568b
  • Token ring cables
• Double molded housing
• CAT111 600V / CAT11 1000V
• Provides easy to read continuity and fault status display
• Checks for continuity, open wire, grounded wire, shorted pair and crossed pair faults
• Allows for remote testing of installed cables from wall jack or patch panel
• Auto or manual scanning for LAN tester
• Autoranging with auto power off for multimeter functions

Package Contents

• 1x DOSS DM1000 Multinetwork Modular Cable Tester
• 1x LAN test Remote Terminator
• 1x Set of Test Leads
• 3x RJ11/12 Inserts
• 1x BNC plug to plug Adaptor
• 1x RJ45 Plug to Plug Short Lead
• 2x RJ45 Plug to BNC Socket Short Leads
• 2x AAA Batteries
• 1x 9V Battery
• 1x Carry Case
• 1x User Manual
• 12 Months Australian Warranty

DM1000 Manual

VISUAL FAULT LOCATOR FOR FIBRE

The NF-904 VFL is a compact but powerful Visual Fault Locator, used to find sharp bends & breaks in jacked or bare fiber. It could also be used to identify the connectorsin patch panels and fibres during splicing operations.

Features

• Breakage and winding testing
• End-to-end fiber recognition
• Pulsed and CW operation
• 2.5mm universal connector
• Rugged and weatherproof design
• 5mW Output Power

Specifications

In the box

• 1x NF904 Visual Fault Locator
• 1x Case
• 1x User Manual

PRO COAX & LAN CABLE TESTER

The LCT8 is a great tester for people doing communicationinstallations and maintenance, as it provides quick verification of several common types of communication problems in structured LAN wiring, coaxial cabling and telephone wiring.

Main Functions

• Find the open circuits, short circuits, jumpers, crossed or split pairs in coax and UTP cables.
• Identifies and locates the distance to an open or a short in seconds
  • Time-domain reflectometer (TDR)
• Identify cables using upto 8 (optional) remote terminators
  • Remote adaptors require no extra power
  • 1x remote terminator supplied with LCT8
• Low battery indication.

Download the LCT8 user manual (525kb PDFfile)

Features

• Measures cable length in a box, on a spool, or in a wall. Know how much cable you have left on a spool before beginning your pulls.
• Check for wiring errors in: LAN UTP cables, coaxial cables and telephone lines,
  such as:
  • open circuit,
  • short circuit,
  • jumper wire,
  • reverse connection,
  • cross talk interface or,
  • split pairs.
• Locate the wiring or connection error.
• Dynamically calibrate cable length and make length measurement as accurate as 97%.
• Simple and easy to use 144 x 64 Dots FSTN LCD screen display test results.
• Portable unit with long battery life.
• Automatic time delay shut off.
• Measure length and pair without the need for remote terminator.
• 1x Remote terminator with audible alert supplied.
• Self-checking function and automatic compensation for any change in battery capacity or ambient temperature.
• Dimensions: 195 x 93 x 38mm (LCD display: 69 x 38mm)
• Locate/Identify cables with up to 8 remote passive test jacks
  • Note: Only 1x passive terminator supplied (ID01)
  • 7x extra optional passive terminators available: LCT8RM

Specifications

.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold; text-align: left }

Warning

The LCT8 should not be used on an ‘active’ circuit, since it will interfere with the signal and affect the testing judgments.

DUAL MODE GAS LEAKAGE DETECTOR

Features

HT61 gas leak detector quickly and accurately identifies a wide range of combustible gases such as propane, methane, natural gas, coal gas, gasoline, LPG, LNG, and more, with dual-modes high and low sensitivity detection to prevent any hazardous situations and ensure the safety. 

• Easy to carry, thanks to the pen-style design, to use in broad applications such as kitchen gas stoves, water heaters, natural gas heating systems, RV propane tanks, factory gas pipelines, and more to diagnose problems. 
• Visual & Audible Alarm, A continuous 75 dB alarm tone and red LCD light to alert when combustible gas is detected. The green backlit makes the LCD display easy to read. 
• Easy to use, 30 seconds warm up, then move the sensor head closer to the detection point.
• Battery status indicator 
• Auto power off after 10 minutes

Tips: Turn on the detector in a clean-air environment and wait for the warm-up to complete then start to do the test. 

Specifications

• Sensor: Gas-sensitive semi-conductor
• Reaction range: >50PPM (methane)
• Warm-up time: Approx. 30 secs.
• Reactions time: <=500PPM: Approx. 5 secs
• Reactions time: >500PPM: Approx. 2 secs
• Alarm mode: Visible and audible
• Operating condition: 0~50°C / 20~ 80% RH
• Storage condition: -10 °C~ 60 °C / 20~80% RH
• Battery: 2 x 1.5V AAA (included) 
• Size: 180*32*31mm
• Weight: 46g

Package includes:

• 1x Gas leak detector
• 2x AAA battery
• Manual

CABLE CONTINUITY TESTER

The 4 in 1 Cable Tester tests 4 common LAN and Computer cables. It tests installed cables or patch cords with RJ-45,RJ-11,USB and BNC connectors. It is used to test faulty cables such as open, cross cables, short-circuit or crosstalk.

Features

• Tests shielded (STP) or unshielded(UTP) LAN cables
• Test shields in 1394 and USB cables
• Ergonomic portable handheld design
• Tests installed wires and patch cables
• Remote unit stores in Main unit
• 180m test distance (RJ-45/RJ-11/BNC)
• Simple one button test
• LEDs indicate connections and faults
• Beeper provides audible annunciation of test results

Specifications

LAN CABLE CONTINUITY TESTER

Quick and easy check for cable continuity, miss-wiring, Open, short, straight-through or cross pinning whatever the cable was installed or not.

Features

• It can test corresponding double – twisted cable 1, 2, 3, 4, 5, 6, 7, 8 and G
• Visible LED status display
• Automatically runs all tests and checks for continutiy, open,shorted and crossed wire pairs
• Slow and fast test mode

HDMI CABLE TESTER

The HDMI Cable Tester is designed for the HDMI installations. This portable device allows installers to quickly test, troubleshoot and verify HDMI cables. It is designed to test wire circuit state of HDMI cables with TypeA & C connectors conforming to all HDMI specifications up to version 2.0. Equipped with 2 test modes: fast and slowscan, to identify the cable short, open and crossed status.

The main differences between NF622 and NF611:

1. There is no loopback HDMI A socket on the NF611, so all the HDMI tests require to use of the master unit and remote unit. 
2. There are no Pass/Open/Cross/Short led lights on the master unit of NF611. 

Features

• Fast and accurate verification with type A-A, A-C, C-A and C-C connectors
• Test fragile, easily damaged HDMI patch cords and in-wall HDMI cables
• Quickly troubleshoot and verify HDTV installation and DIY termination in the field
• Test disorder, short, open and cross status of HDMI cables
• Mapping continuity and proper configuration
• 19 pins and grounded connection with the leds on both main and remote unit
• Adjustable test modes: Continuity and sweep modes
• Supplied with small carry bag

Specifications

AUTOMOTIVE DIGITAL MULTIMETER

Digital Automative Engine Analyzer Multimeter

• LCD Display
• Drop-Proof Holster
• Full protection on all ranges
• Easy battery replacement

Specs:

• Display: 3 1/2 Digits LCD with a max reading of 1999
• Polarity: Automatic Negative PolarityIndication
• Power: Single standard 9V Battery
• DC Voltage: 200mV, 2V, 20V, 200V
• Impedance: 10 MΩ
• Resistance: 200Ω, 2kΩ, 20kΩ, 200kΩ / 20mΩ
• DC Current: 200mA / 15A
• Tachometer: 0 – 12000 RPM

In the box:

• DM1440 multimeter
• Inductive pickup clamp
• Standard test leads
• Aligator clip test leads
• K Type thermocouple & adaptor
• 9V Battery
• User manual

XL DISPLAY DIGITAL MULTIMETER

Features an extra large display with 25mm high digits. This is a full-featured meter with a high resistance range of 20M Ohm, 10A current rating, capacitance reading to 200uF, transistor tester and temperature to 800 degrees celsius. The meter is supplied with temperature probe, rubber holster and probe leads.

• 3.5 Digit Extra Large Display
• 1999 Count
• Capacitance
• Transistor Test
• Continuity Buzzer
• Diode Test
• Temperature
• Auto-Power Off
• Holster Included
• Includes Bonus Temperature Probe

Specifications:

• DC voltage: 200mV / 2V / 20V / 200V / 600V ± 0.5%
• AC voltage: 2V / 20V / 200V / 600V  ± 1.0%
• DC current: 2mA / 20mA / 200mA / 10A  ± 1.0%
• AC current: 2mA / 20mA / 200mA / 10A  ± 1.5%
• Resistance: 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ  ± 0.8%
• Capacitance: 200nF / 2µF / 20µF   ± 2.5%
• Temperature: -20°C to +800°C  ± 3.0%
• Input impedance: 10 MΩ
• Dimension: 44 (H) x 91(W) x 194(L) mm
• Battery: 9V 6F22

BASIC DIGITAL MULTIMETER

Doss DT830D Basic Digital Multimeter

The Doss DT830D is a general-purpose, low-cost digital multimeter designed for everyday use. It features a sturdy yellow case and shrouded probes for added safety. This improved model now includes the ability to test current of 0.8mA (square wave output).

Features:

• Diode and Audible Continuity Test
• 3.5 digit LCD with a Max. reading of 1999
• hFE transistor tester
• Low battery indication

Specifications

What’s in the box?

• DT830D Multimeter
• Shrouded safety test leads
• Multi-function socket
• 2x AAA Batteries
• User manual

MULTIFUNCTION CABLE TESTER

Features

• POE information testing: Identifying which pins are providing power and detect how much voltage, and which type of the PSE (at/af standard) from DC range 5V to 60V standard or non-standard POE switch.
• Featured with the new generation to offer AC filter and analog signaling all in one network toner and probe, there are three cable scan options to track cable like Digital mode analog mode and PoE mode, which means it’s equipped with the most powerful cable location technologies for any work environment.
• Cable continuity testing. Test physical status forCat5e/Cat6, Cat6a STP, UTP LAN cable such as open, short or cross.
• Measure cable length and locate fault distance for LANcable from the range up to 200m.
• Hub blink, Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
• NCV, Non-Contact Voltage, Detect AC voltage presence 50V-1000V.
• Lamp

Specifications

What is in the box?

• Emitter x 1pc
• Receiver x 1pc
• Wiremap remote x 1pc
• Earphone x 1pc
• Cable adaptor x 1 set
• 9V battery x 1pc
• AAA battery x 3pcs
• Carry bag x 1pc
• User manual x 1pc

3 IN 1 POE POWER TESTER

Features:

• Test the information of the standard PoE device, such as afat standard, power supply voltage, power supply polarity, and crossover mode.
• Identify the supply voltage, power supply polarity, and crossover mode of non-standard PoE devices.
• Check the short circuit, crossover and open circuit status in the network cable with the far end.
• Test the power consumed by DC appliances.
• The loop-back test function of the switch.

Specification:

DISPLAY PORT CABLE TESTER

Features

The Doss NF-633 display port cable tester tests 20 internal wires individually and gives a clear reading of display port cable condition.

• Supports display port and mini display port cables
• Max testing distance: 15m
• Requires 9V battery

Specifications

8MP IR30M IP66 VANDALPROOF DOME IP CAMERA

Features

• 8MP 3840*2160@ 20fps, 5MP(2592*1904@25fps)
• HTML5 supported, no more ActiveX installation required, compatible with Chrome/Edge/Firefox/Safari internet explorer
• Hikvision private protocol supported, plug and play with popular Hikvision NVRs
• The 2.7-13.5mm motorized lens makes easy to adjust the focal length and zoom level
• H.265/H.264 supported, saves bandwidth and storage space
• 1/2.8" SONY Progressive Scan CMOS sensor
• Humanoid detection
• Support human alert voice broadcast
• IR-Cut (Infrared-cut) filters for producing accurate color images
• IP66 rating
• 32x IR Leds, IR distance up to 30-40m
• DC12V or POE power options
• Detection frame 5fps, detect up to 5-10 people at the same time
• Support low bit rate and low latency
• Support Smart IR to avoid Infrared over-exposure at night
• Support ICR auto switch, realize D&N surveillance
• Support 3D DNR and digital WDR
• Support auto-electronic shutter to suit different surveillance environments
• Support HTTPS transmission with the password, default password 123456

CONNECTIONS

• [DC] 12V DC power input
• [RJ45] Ethernet port
• Alarm input/output
• Audio output
• Audio input

Specifications

FAQ

Visit our NVR IQ Range knowledge base for tips, tricks, how-tos and videos!

FISHEYE 12MP PANORAMIC CAMERA

Features

• Max resolution 12MP (4000*3000 @20fps)
• One camera to 5 channels on NVR to cover a wide area
• Panoramic view of the camera
• Support low bit rate, low delay, and ROI enhance coding
• H.265 high effective compression, save bandwidth and storage space
• Support multi-line OSD, OSD color can be adjusted
• High effective IR LEDs, long service life, IR distance can reach 15-20m
• Support Smart IR, prevent IR overexposure at night
• ICR infrared filter plate automatic switch, achieve real D/N monitoring
• Support corridor mode, increase the monitoring area in longitudinal strip environment
• Support PoE
• Support Micro SD card (up to 128G) local storage
• Support 3D digital N/R, DWDR
• Support auto electronic shutter function, adapt different monitoring environment
• Support various intelligent alarm
• Support bidirectional talk
• Support 1CH alarm input / 1CH alarm output
• Support GB28181, Onvif access
• Support Emai, FTP, NTP
• Support HTTPS encryption transmission

Note: As it requires de-warping technology built into the NVR to correct the distortions of the videos obtained from the fisheye lens, the fisheye camera is not compatible with all NVRs, it is only compatible with DOSS IQ4K series NVR.
De-warping the 360-degree view to 4 channels in 4 directions, plus the main panoramic view, you can set up a total of 5 channels from this fisheye camera.

Built-in intelligence

The new Doss cameras are smarter. Real smart. Whether youwant to make sure a particular object has been removed or not or whether you need to know if a fire has started or not, the new Doss IQ range cameras have it all.

Here are some of the intelligent analysis baked into the cameras:

• Target counting
• Area detection
• Object detection
• Line crossing

Specifications

Specifications

FAQ

Q: No audio from the camera?

A: Refer to the article in the knowledge base under the IP camera section.

DOME IP CAMERA WITH MICROPHONE

Features

Features

• Max resolution 2Mega(1920×1080 @ 30fps)
• Support low bit rate, low delay and ROI enhance encoding
• H. 265 high effective compression, save bandwidth and storage space
• Support multi-line OSD
• High effective IR leds, long service life, IR distancecan reach 5-10m
• Support Smart IR, prevent IR overexposure at night
• ICR IR filter plate automatic switch, achieve real D/N monitoring
• Support corridor mode, increase the monitoring area in longitudinal strip environment
• Support Micro SD card (256G) local-storage
• Support 3D digital N/R, DWDR

Specifications

Specification

FAQ

Q: No audio from the camera?

A: Refer to the article in the knowledge base under the IP camera section.

DOME 30M IR IP 8MP 4K CAMERA

Features

• Sony 1/2.5" 8MP Progressive Scan CMOS
• Max resolution 8Mega(3840*2160 @ 30fps)
• 3.0-10 mm motorized lens
• 20-30m IR distance
• 92° to 28° view
• Built-in intelligence
• H.265 encoding Compared to H.264, the new H.265 encoding on the Doss CCTV cameras provide 40-50% reduction in bit rate. Which means you get to store more footage without sacrificing video quality!
• Support Smart IR, prevent IR overexposure at night
• DSP: HI3516D+IMX274
• High effective IR led, long service life,IR distance can reach 20-30m
• Easy setup remote viewing for PC, Mac, iOS, and Android
• PoE (Power over Ethernet) &DC12V
• SNR: =35db
• Support corridor mode, increase the monitoring area in longitudinal strip environment
• Support Micro SD card (256G) local-storage

High Resolution – See more!

Built-in intelligence

The new Doss cameras are smarter. Real smart. Whether youwant to make sure a particular object has been removed or not or whether you need to know if a fire has started or not, the new Doss IQ range cameras have it all.

Here are some of the intelligent analysis baked into the cameras:

• Target counting
• Area detection
• Object detection
• Virtual Guard

Connections

• [DC] 12V DC power input
• [RJ45] Ethernet port
• [BNC] Analogue video out
• Audio input/output
• Alarm input/output

Specifications

FAQ

IP SECURITY DVR KIT – DOSS

IP SECURITY DVR KIT – DOSS

Professional quality 4 Channel IP DVR unit for use in thehome or office

Allows 24hour remote monitoring through IP stream on compatible portable devices like the iphone.

Kit includes:

• 1x 43170800 – 4CH IPHONE COMPATIBLE NETWORKING DVR WITH VGA
• 1x 69000030 – 500GB INTERNAL HDD
• 2x 43150008 – 540TVL SECURITY CAMERA WITH IR
• 2x 43150084 – 540TVL SECURITY DOME CAMERA
• 2x 43158115 – 10MT CAMERA EXTENSION LEAD WITH VIDEO & POWER
• 2x 43158125 – 20MT CAMERA EXTENSION LEAD WITH VIDEO & POWER
• 1x 33774500 – 12V DC 2.5A SWITCHMODE POWER SUPPLY
• 1x 30978204 – DC PLUG DISTRIBUTION LEAD

FEATURES:

• H.264 (main profile)/ MJPEG video compression
• Support 1/4ch playback simultaneously
• Support multiplex, PPPoE, DHCP, SATA HDD.
• Support USB2.0 backup, dual stream bit
• Integrated web server for access via Internet Explorer
• Email Alert – Sends log, picture, IP information to the appointed mailbox when alarm is activated
• Built-in buzzer alarm – Configure to sound a warning when motion is detected or video signal is lost
• Auto-recovery capability after powering on
• 16-bit colour menu with user friendly OSD
• Support schedule recording, 120 preset schedule tasks
• Search recording by time and day

SPECIFICATIONS:

8CH 8 POE IQ ANALYSIS 4K NVR

.dvr-features { /*clear:both*/ } .highlight-feature { float: right; clear: right; padding: 10px; margin: 0 20px 20px; border: 1px solid silver; width: 180px; box-sizing: border-box; -moz-box-sizing: border-box; } .highlight-feature img { max-width: 100% !important; width: auto !important; height: auto !important; } .nvrIqImg { height: 54px; width: 169px; text-indent: -10000px; margin: 10px 0; } .nvrIqImg.newIq { background: url(‘/Images/nvr-iq-new-features.png’) 00; } .nvrIqImg.newUi { background: url(/Images/nvr-iq-new-features.png) 169px 0; } .nvr-iq-ss img { width: 154px; } .nvr-iq-ss img:hover { box-shadow: 0 0 5px rgba(0, 0, 0, 0.5); } .nvr-iq-ss { margin: 10px 0; } table.nvriqTbl td { padding: 5px; border-top: 1px solid #ccc; text-align: center; } td.tdTitle { color: #1291bd; text-align: right !important; height: 50px; vertical-align: top; }

Features

8 channel/8 PoE Network Video Recorder

• Supports up to 4K camera resolution
• Compatible with fisheye camera
• 100M/1000M Ethernet Port
• 8CH full real-time network video access, 1U NVR case
• H.265/H.264 dual-stream decoding, embedded linux operation system
• Support sync video recording, remote monitoring, backup
• HDMI output, support 2160P HD preview
• Support 12 times amplification preview and playback video, 8CH standard PoE
• Standard ONVIF, RTSP, GB28181 protocol
• Support DDNS, EMAIL, UPnP, NTP, P2P,etc
• Support FSAN SMART IPC (Target counting, object left/lost, area detection, line crossing detection)
• Support grouping disk quota, and disk inventory two storage pattern, distribute different video storage capacity or cycle according to different channels
• Support IPC centralized management, including IPC parameters configuration, import and export information, information real time acquisition and upgrade, etc
• Support channel grouping, preview round touring
• Network detection(network flow monitoring, network wireshark, network clear)
• Max 8CH sub-stream record sync playback and multi-channel sync play backward
• The new UI interface, support a key to open the video recording , Instant playback
• Dual password authentication and zero channel function

New and Improved Features

Notes: Please note there are two network cards built into the NVR. If you use the NVR POE for your IP camera, when you add the IP camera to the NVR, you need to change the IP camera address to different subnet range. Forexample, NVR is Lan1, the IP address will like 192.168.1.189, and all other IP cameras directly connected to the NVR should be set to the address like 192.168.2.xxx;

When you add any ONVIF protocol camera to the NVR, please make sure you have changed the IP address of the ONVIF camera before you add it to the NVR, Lan 2 subnetif connects to NVR directly, Lan 1 subnet if it has own power or connects to POE switch. It is also required to add user name and password info for each ONVIF camera in NVR channel settings, even you have no password set in the camera itself, as NVR has no permission to change ONVIF IP camera address and couldn’t access the camera without login credentials.  

The Doss IP NVRs are now smarter with baked in Intelligence features. On top of all that, they also now support higher resolution cameras!

Here’s what’s new with the IQ NVR range:

• New Graphical User Interface

  The layout and usability on the new NVRs have been greatly improved over their predecessor, making navigating and finding what you want a much easier experience.

  
• New IQ Features

  Smarter, more intelligent features mean the NVR does all thehard work and gives you the alerts you really need!
  

IQ Analysis

With more and more people now turning to CCTV surveillance for their security needs, its no surprise that new technologies are being developed and implemented to helpreduce the need for manual monitoring and the costs associated. One such strategy is the use of Intelligent Video Analytics (IVA).

The Magic of Intelligent Detection

IVA focuses on automating the video analysis of large amounts of data footage and security alerts, rather than having people monitor each camera manually. The software utilises a range of rules and algorithms to ignore any changes in lighting conditions or non-critical activity, andfocus on specific triggers to identify suspicious behaviour and objects.

A good example of Analytics would be its ability to alertauthorities of suspicious objects left in public places, like airports, and use facial recognition to help track downfugitives. It could also be used in Highway CCTV situations to capture and report a vehicle travelling in the wrong direction or performing an illegal turn. Even for the domestic home, Analytics could alert and monitor a trespasser crossing a property line.
With every aspect of our lives being digitised, video footage will be increasingly tagged to these events. Imagine a person scanning a train ticket at a turn style. The scanning of the ticket and the footage from the CCTV camera will get put together and be readily accessible in real time or a month later.

Notes:

Please note for the DOSS 8ch and 16ch NVR range, the IQ analysis feature relies on the built-in IQ feature of the IPcameras themselves, as the chipset built-in to the NVR is not powerful enough to analyse all the data being captured.

The only exception to this is the 36ch version, NVR36IQ4K, which also supports the local detection features fortarget counting, object detection, object left/lost, line cross detection, scene change, motion detection, video loss,privacy mask & video tampering. The new Doss range of the 4MP and 8MP IP cameras support these IQ features.

Specs

Rear Interface

• RJ45 LAN Port
• 8x POE RJ45 POE ports for cameras, total 80W POE
• VGA output
• HDMI Output
• Terminal block for alarm input/output
• Terminal block for RS485
• RCA audio/mic input
• RCA audio/speaker output
• 2x USB2.0 ports for mouse and external drives
• DC Power Input

Specifications

FAQ

CCTV Calculator Calculate everything!

In the box?

• NVR
• 48V 2.5A DC Power supply with detachable IEC lead
• USB Mouse
• HDD Connection Kit
  • 2x SATA cable
  • Molex power cable
  • 8 screws
• Software CD

Videos

Watch our NVR IQ Series Videos over at our YouTube channel.